D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: aferland on March 03, 2014, 07:44:48 AM

Title: DFL-860E - Site-To-Site VPN - no traffic
Post by: aferland on March 03, 2014, 07:44:48 AM

Hello,

I have setup a Site-To-Site VPN with one of our client.

We can see from both sides that the connection is there but I can't get the traffic to go through the VPN tunnel.

Here's the IPSec status window
http://picpaste.com/VPNConfig1-9wbgZw4c.png (http://picpaste.com/VPNConfig1-9wbgZw4c.png)

Here's the IKE Status
http://picpaste.com/VPNConfig2-07QBaZge.png (http://picpaste.com/VPNConfig2-07QBaZge.png)

Here's the ARP Broadcast for the multiple Public IPs
http://picpaste.com/VPNConfig3-CBWt3znK.png (http://picpaste.com/VPNConfig3-CBWt3znK.png)

Here's the IP Rule
http://picpaste.com/VPNConfig4-zoKRVgHv.png (http://picpaste.com/VPNConfig4-zoKRVgHv.png)
http://picpaste.com/VPNConfig5-R7fya84R.png (http://picpaste.com/VPNConfig5-R7fya84R.png)

and here's the log information when I try to connect from the LAN to the Remote Lan through the tunnel
http://picpaste.com/VPNConfig6-OK4D9nsS.png (http://picpaste.com/VPNConfig6-OK4D9nsS.png)

Is there anything wrong with my setup?

Any idea about how to fix the issue?
Thanks in advance,
Alex

Title: Re: DFL-860E - Site-To-Site VPN - no traffic
Post by: FurryNutz on March 03, 2014, 09:51:35 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your FW Look at sticker under FW.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the FWs web page under status.
• What region are you located?

I recommend that you phone contact your regional D-Link support office and get immediate help and information on this.