D-Link Forums

D-Link IP Cameras for Home => DCS series Network Cameras => Topic started by: 780user on April 07, 2014, 08:29:55 AM

Title: Pink noise in picture
Post by: 780user on April 07, 2014, 08:29:55 AM

Yes, suddenly pink noise in the picture from my DCS-6210, not to be mixed with pink audio noise....

Anyone experienced anything like this ? Solution ?

Current firmware 1.00.06

(http://195.159.154.110/dlink/dcs6210.jpg)

Title: Re: Pink noise in picture
Post by: JavaLawyer on April 07, 2014, 06:37:45 PM

Log into the web UI and navigate to SETUP > Image Setup. Does the visual artifacts disappear if you change either the Exposure Mode, Max Gain, or Denoise settings?

Title: Re: Pink noise in picture
Post by: 780user on April 07, 2014, 11:08:53 PM

Hi.   It changes a little bit. Tried "default" settings with no luck. Looks like the overexposed parts turn pink...

Title: Re: Pink noise in picture
Post by: JavaLawyer on April 08, 2014, 04:29:05 AM

Quote from: 780user on April 07, 2014, 11:08:53 PM

Hi.   It changes a little bit. Tried "default" settings with no luck. Looks like the overexposed parts turn pink...

That's where I was heading as well. I thought perhaps turning down the gain or reducing the exposure would remove the noise.

Title: Re: Pink noise in picture
Post by: 780user on April 09, 2014, 06:48:40 AM

All settings to default, gain to 0dB. Still same result.

(http://195.159.154.110/dlink/dcs6210b.jpg)

Title: Re: Pink noise in picture
Post by: JavaLawyer on April 09, 2014, 11:09:57 AM

Have other DCS-6210 owners (or other models for that matter) observed similar image discoloration?