D-Link Forums
The Graveyard - Products No Longer Supported => Other D-Link Products => Topic started by: unleashed333 on April 27, 2014, 02:31:41 AM
-
Greetings All
I have two DAP 3410 configured in WDS mode and having each opposite MAC Address in Wireless Settings,but still it is not working.
Building A
INTERNET ROUTER(192.168.2.1)---DAP 3410(192.168.2.50)
Building B
DAP 3410(192.168.2.51)---Access Switch
Can any one please help me in this problem.Thankyou
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What Hardware version is your DAP? Look at sticker under the DAP.
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
- What region are you located?
Wireless Configurations
Links>Wireless Installation Considerations (http://forums.dlink.com/index.php?topic=48327.0) and Managing Signal Congestion (http://forums.dlink.com/index.php?topic=53228.0) and Good Neighbour Policy (http://forums.dlink.com/index.php?topic=10634.0)
- Ensure the default (dlink) SSID name is changed. Can be anything and not something that's already in use by any neighboring WiFi routers. Under Setup/Wireless/Manual.
- What wireless modes are you using?
- 2.4Ghz DAPs only: Try single mode G or N or mixed G and N?
- Channel Width set for Auto 20/40Mhz or try 20Mhz only.
- Try setting a manual Channel (http://en.wikipedia.org/wiki/Wireless_channel) to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions.
- What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES (http://en.wikipedia.org/wiki/Advanced_Encryption_Standard), so you might want to try TPIK (http://en.wikipedia.org/wiki/Temporal_Key_Integrity_Protocol) only or Auto TPIK and AES.
- What wireless devices do you have connected?
- Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by?
- Any other WiFi routers in the area? Link> Use InSSIDer (http://www.metageek.net/support/metageek-software-archives/) to find out. How many?
Does the DAPs connect if you temporarily disable all WiFi secure modes just to test? Turn back on after test.
-
Any status on this? ???
Greetings All
I have two DAP 3410 configured in WDS mode and having each opposite MAC Address in Wireless Settings,but still it is not working.
Building A
INTERNET ROUTER(192.168.2.1)---DAP 3410(192.168.2.50)
Building B
DAP 3410(192.168.2.51)---Access Switch
Can any one please help me in this problem.Thankyou