D-Link Forums

D-Link DSL Modem/Routers => Other DSL modem/routers => Topic started by: wilkenj on May 07, 2014, 05:10:46 AM

Title: QNAP TS 220 Not connecting to D-Link DSL-2750U
Post by: wilkenj on May 07, 2014, 05:10:46 AM

Greetings all

I recently move out my parents place. I took the NAS with but the router had to stay. So I got provided a D-Link DSL-2750U by my service provided

I have tried both static ips aswell as using the DHCP neither is working I have chect the ethernet port and cable by using a laptop.

right now the configuration is

router
IP Address:   192.168.1.1
Subnet Mask:   255.255.255.0

nas
IP Address:   192.168.1.200
Subnet Mask:   255.255.255.0


There are no IP conflicts that I am aware of.
the NAS Lan LED on front flashes yellow every 4 second on the back at the Ethernet LED flash yellow every 4th second and 2 green flashes in that same second.
The Router does not even flash to show that a Ethernet net cable is plugged in

Connecting the NAS directly to PC (192.168.1.33) works, however this is not ideal I want the NAS accessible from my wireless devices.

I have run out of ideas please advise where to from here......
Thanks in advance.

 

Title: Re: QNAP TS 220 Not connecting to D-Link DSL-2750U
Post by: FurryNutz on May 07, 2014, 07:18:04 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your modem? Look at sticker under modem.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the modems web page under status.
• What region are you located?

Do other devices connect to the modem and gain access to Internet services?

Title: Re: QNAP TS 220 Not connecting to D-Link DSL-2750U
Post by: wilkenj on May 11, 2014, 11:00:42 AM

Thanks for the Welcome note.

And thanks for the response

• Hardware Version: Material Number: 6004343 P/N ISL2750UF1K0211E
• Current Firmware Version: AF_1.65_R01
• Previous Firmware Version: AF_1.68_T0
• Region: South Africa(don't know what Region possibly of EMEA)

Yes I have connected a laptop via Ethernet port to ensure the port and cable I was using on the NAS was fine. Yes this laptop was able to connect.

Title: Re: QNAP TS 220 Not connecting to D-Link DSL-2750U
Post by: FurryNutz on May 12, 2014, 07:49:06 AM

I would presume that if other devices and the same cable used are connecting to the Internet correctly, I would check the networking configuration on the NAS to ensure it's correctly set up. You'll need to refer to the Mfrs web site for support and information regarding it's settings.