D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320L => Topic started by: LuchianC on June 03, 2014, 04:51:00 AM

Title: 320L Problems with WD 3TB
Post by: LuchianC on June 03, 2014, 04:51:00 AM

Hi there,

I have 2 WD 3TB, 1 green and 1 red and on both i have same problem. After i reach 84% i get error: "Disk Protected" and i can not write on them, first i was thinking that problem was from green disk and i buy second one, wd tb red. After i copy all from green to red same problem on red now. I can not copy because: "Disk Protected".

Anyone know how to resolve? Or what's the problem?

Thanks,

Title: Re: 320L Problems with WD 3TB
Post by: LuchianC on June 04, 2014, 07:54:36 AM

Anyone have this problem? I format 1 disk and work ok, but after i reach 80% from them it's now working anymore and give me error: "Disk Write Protected"

Title: Re: 320L Problems with WD 3TB
Post by: koadrian on June 08, 2014, 09:34:53 PM

(https://imagizer.imageshack.us/v2/542x378q90/841/a1fy.png)

Title: Re: 320L Problems with WD 3TB
Post by: koadrian on June 08, 2014, 09:35:22 PM

change your privilege.

Title: Re: 320L Problems with WD 3TB
Post by: LuchianC on June 17, 2014, 12:20:59 AM

It's not about privilegies. I delete arround 5gb of files and not it's working... i asking if anyone know is any problem with this time of hdd, after i reach 80% of them give me error from first post. Now i am:

2748.2GB / 549.8GB Available  79%

i'll try again to upload files to 80% :)

Title: Re: 320L Problems with WD 3TB
Post by: regi on June 17, 2014, 02:59:57 AM

hi,

no problems here, using firmware 1.03

2748.2GB / 342.9GB Available  87%

Title: Re: 320L Problems with WD 3TB
Post by: LuchianC on June 17, 2014, 04:53:41 AM

I tested again and as i see i can copy files but when i try to copy a .psd wich is arround 1.76GB give me that erorr, but on .jpg and raw pictures it's ok.