D-Link Forums

The Graveyard - Products No Longer Supported => Other D-Link Products => Topic started by: alex_82 on July 14, 2014, 07:14:04 AM

Title: Just a question about virtual server configuration
Post by: alex_82 on July 14, 2014, 07:14:04 AM

Hi to all.

Just a question about virtual server configuration.
Is it possible to configure 2 or more IP address with the same internal port and different public port ?

I mean something like that:

public port 5551, IP address 156.125.0.25, internal port 25
public port 5552, IP address 156.125.0.26, internal port 25

the dwr 921 said that the internal port is duplicated, but i think that the control should be necessary only for public port and IP address ! not for internal port on a different server (different IP address).

i need that to work with six IP cameras with different IP address and the same rtsp PORT (example 554)

someone can help me ?
maybe possible that the firmware must be updated in order to solve this issue ?
thanks to all and regards !

Title: Re: Just a question about virtual server configuration
Post by: FurryNutz on July 14, 2014, 08:08:19 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your router? Look at sticker under router.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?

I presume that you may need to use different ports as you can't use duplicate ports for different devices.

Title: Re: Just a question about virtual server configuration
Post by: FurryNutz on August 29, 2014, 12:38:45 PM

Any status on this?  ???

Quote from: alex_82 on July 14, 2014, 07:14:04 AM

Hi to all.

Just a question about virtual server configuration.
Is it possible to configure 2 or more IP address with the same internal port and different public port ?

I mean something like that:

public port 5551, IP address 156.125.0.25, internal port 25
public port 5552, IP address 156.125.0.26, internal port 25

the dwr 921 said that the internal port is duplicated, but i think that the control should be necessary only for public port and IP address ! not for internal port on a different server (different IP address).

i need that to work with six IP cameras with different IP address and the same rtsp PORT (example 554)

someone can help me ?
maybe possible that the firmware must be updated in order to solve this issue ?
thanks to all and regards !