D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320L => Topic started by: dsslim on July 17, 2014, 10:33:38 PM

Title: High Temperature
Post by: dsslim on July 17, 2014, 10:33:38 PM

Hi,

My hard disks are seagate barracuda 7200rpm. It's usually shown 53 degrees Celsius on the hard disk info page. System temperature is 50 degrees celsius.

Is this normal ? I set the fan to manual high.

Title: Re: High Temperature
Post by: pittnuma on July 22, 2014, 07:29:28 AM

Mine usually hovers around 40-50 so I would say yes especially with the heat recently.

Title: Re: High Temperature
Post by: dsslim on July 24, 2014, 06:27:10 PM

Now I open the top cover and blow a usb fan at the opening.
Managed to keep disks temperature at 46 and system at 48.

Title: Re: High Temperature
Post by: JohnnyDemonic on September 30, 2014, 03:47:37 PM

USB fan here as well.

Bay    Dev.    Model    Capacity    Power Status    Temp    Health
right   sda    WDC WD20EARX-00PASB0    2.0TB    active or idle    29°C/84.2°F    passed
left    sdb    WDC WD20EARX-00PASB0    2.0TB    active or idle    30°C/86°F    passed

Title: Re: High Temperature
Post by: Zlaxhe on October 04, 2014, 07:06:19 AM

I usually recommend WD red series drives, they are less hot and performs pretty well. Some people complain, but i transfer to and from my nas with 100 MB/s (1000 mbps) i have a Asustor AS-604T