D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-855 => Topic started by: Mock on June 18, 2009, 02:41:33 PM

Title: Can´t use internet or local network anymore with firmware 1.20NA
Post by: Mock on June 18, 2009, 02:41:33 PM

I found out to day that ether my routher don´t work anymore or its because the router got a end period, i can´t ping any of my local devices, and i can´t get on the internet. i tried my old D-Link 655 that works. and i also tried do reset the router to default. still same problem.

Should i RMA the router or is there a fix for this?

Title: Re: Can´t use internet or local network anymore with firmware 1.20NA
Post by: Mock on June 18, 2009, 03:55:38 PM

ok as a follow up on this. i tried uploading the same firmware. and reset the router after. still didnt help, after that i tried from my workstation where it now seems to work. after my workstation started all other machines worked again. and my laptop could also logon even after restoring the config that didnt work. tried also to flushdns and registerdns everytime i didt something. but i couldnt even ping my nas, from the router interface, where its possible to make a system check

Title: Re: Can´t use internet or local network anymore with firmware 1.20NA
Post by: Mock on June 19, 2009, 03:54:09 AM

hmm. now the problem is back, when i get home from work. i´ll see if its possible to fix again, wierd thing is that DHCP is working but can´t ping anything on the Lan ports

Title: Re: Can´t use internet or local network anymore with firmware 1.20NA
Post by: SanderT on June 20, 2009, 02:24:42 PM

Yes, just like also the other guy on this forum reporting the same problem http://forums.dlink.com/index.php?topic=6036.0 , I have the same problem, it just freezes up every few days, see my post in the EU section(http://forums.dlink.com/index.php?topic=5177.msg31995#msg31995). I also have the same symptoms as you are. But here comes the tricky part, I've been having it with the 1.13 firmware for the EU region. It seems the 1.13EU region firmware (which was never released for the NA region, 1.12 was the highest before 1.20), has the same codebase as the new 1.20NA firmware, cause I've been having the same problem as you are. I hope they fix it soon, at least I was able to go back from 1.13 to 1.12, unfortunately people are stuck on 1.20.

Title: Re: Can´t use internet or local network anymore with firmware 1.20NA
Post by: Mock on June 21, 2009, 04:59:51 AM

It not quite the same, because i can still come inside the webinterface, and can ping the WAN ip, But i decided to change my D-link for a Linksys WRT610N that seems to do the job. before this problem i had alot of issues with Wireless restarts, and where the problem was if WPA or WEP was enable it got unstable. im pretty sure this was my last D-Link product