D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: JOHIRSH on August 21, 2014, 11:11:24 AM

Title: DIR 655 and Port 445
Post by: JOHIRSH on August 21, 2014, 11:11:24 AM

I am trying to get samba sharing to work , again....  I thought I had this working a while back but.

I am 99% I have the two servers configured right   I can do intranet connections..  The problems arises when I come in from the outside

I have tried to both vitrual server and port forwarding on port 445 to get the port open and rto the right server

In both instances I can't get past the router and a port scan shows port 445 as CLOSED

any thoughts or guidance>

Title: Re: DIR 655 and Port 445
Post by: FurryNutz on August 21, 2014, 11:21:46 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your router? Look at sticker under router.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?
• Are you wired or wireless connected to the router?
• Has a Factory Reset (http://blog.dlink.com/what-is-a-reset-button-when-should-i-use-it) been performed?
• Was a Factory Reset performed before and after any firmware updates then set up from scratch?

FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)

• Was the router working before any firmware updates?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.

• Turn off Advanced DNS Services if you have this option under Setup/Internet/Manual or under Setup/PARENTAL CONTROL/Set to>None: Static IP or Obtain Automatically From ISP.
• Enable or Disable Use Unicasting (compatibility for some ISP DHCP Servers) and test under Setup/Internet/Manual. Disable may help with speed performance on higher speed ISP services.
• Turn on/off DNS Relay (http://forums.dlink.com/index.php?topic=45143.0)  under Setup/Networking. Link>Finding Faster DNS Addresses using Name Bench (http://forums.dlink.com/index.php?topic=53222.0) and input new DNS addresses under Setup/Internet/Manual.
• Setup DHCP (http://forums.dlink.com/index.php?topic=58017.0) reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
• Ensure devices are set to auto obtain an IP address.
• If IPv6 (http://en.wikipedia.org/wiki/Ipv6) is an option on the router, select Local Connection Only under Setup/IPv6.
• Set Firewall settings to Endpoint Independent for TCP and UDP under Advanced/Firewall.
• Enable uPnP (http://en.wikipedia.org/wiki/Upnp) and Multi-cast Streaming (http://en.wikipedia.org/wiki/Multicast) under Advanced/Networking. Disable uPnP for testing Port Forwarding rules.

Title: Re: DIR 655 and Port 445
Post by: JOHIRSH on August 24, 2014, 10:40:36 AM

thanks you you response    I punted and switch to VPN access whichI already had working and is actually more secure for my purposes

Title: Re: DIR 655 and Port 445
Post by: FurryNutz on August 24, 2014, 11:57:41 AM

Good Luck and enjoy.  ;)