D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-880L => Topic started by: aycwong2 on December 01, 2014, 08:40:16 PM
-
My router just keeps rebooting whenever I try to connect with the 5 GHz channel with my iPad Air 2. Didn't matter if I limit it to AC only, or switch is down to N only. The moment my iPad Air 2 tries to connect on that channel, the thing reboots.
My iPhone 5 is connecting fine. Laptops seems to be fine. It's just my iPad Air 2. Now I'm connecting the iPad on the 2.4 GHz channel and it's fine.
Not sure if I found a bug, or this is a hardware bug, or what. I've just upgraded to the 1.02 firmware too just to rule that out.
This is a brand new box (A1 version).
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What region are you located?
What iOS version is on the iPad?
- Has a Factory Reset (http://blog.dlink.com/what-is-a-reset-button-when-should-i-use-it) been performed?
- Was a Factory Reset performed before and after any firmware updates then set up from scratch?
>FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)
- Was the router working before any firmware updates?
- Any other WiFi routers in the area that maybe causing interferences? Link> Use InSSIDer (http://www.techspot.com/downloads/5936-inssider.html) to find out. How many? Use v3, its free.
- If you have any of these options, Try turning OFF or ON Short GI (http://www.smallnetbuilder.com/wireless/wireless-features/30969-what-do-80211ns-optional-features-mean-for-you), WLAN Partition, Extra Wireless Protection and HT 20/40 Co-existence if you have it. Also testing with HT20/40Mhz Co-existence enabled will impact results as well. I prefer to use this option OFF. Recommended settings are default. Under Advanced/Advanced Wireless.
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials (http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials)
-
I got an iPad Air 2 which is connecting perfectly on the 5Ghz. I never had any issues.
I got FW 1.01
-
Interesting. I'm on NA (Canada), and upgraded to latest firmware.
My iPad Air 2 is on iOS 8.1. I'm upgrading to 8.1.1 and see if that solves part of the problem.
Now it looks like my iPhone 5 on iOS 8.1.1 is also having issue, but it's more like it just keeps dropping Wifi signal, as oppose to my iPad which kills the router. That issue sounds like it's an apple one from the Apple forum I'm reading.
I have read that if I limit the 5 GHz to a/b/g and not n/ac, then the wifi connectivity issue goes away, but the speed will be affected obviously. I may try that over the weekend.
-
What iOS is your iPad running tgfrules?
I got an iPad Air 2 which is connecting perfectly on the 5Ghz. I never had any issues.
I got FW 1.01
-
What iOS is your iPad running tgfrules?
8.1.1
-
Thanks for the info. Will keep an eye on this. I guess I need to reconnect my 880L and see how my iPhone 6P and iPad mini connect. I didn't have the latest OS a while back after the FW was updated so I may have not experienced this. I'll hook it up tonite and start testing.
-
So the 880L went online after work yesterday evening. My MacBook Pro 2007 with OSX 10.10.1 and iPhone 6P with 8.1.1 thats JBd worked well on 5Ghz. I didn't get a chance to test the iPad Mini yet. Will do this evening. I also gamed for a couple of hours with my 360 connected to the 5Ghz radio as well. Gaming was good.
-
Am having the exact same problem on an IPad Air 2 running 8.3 and DIR-880 running 1.02.
Did you solve this?
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What region are you located?
- Has a Factory Reset (http://blog.dlink.com/what-is-a-reset-button-when-should-i-use-it) been performed?
- Was a Factory Reset performed before and after any firmware updates then set up from scratch?
>FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)
Internet Service Provider and Modem Configurations
- What ISP Service do you have? Cable or DSL?
- What ISP Modem Mfr. and model # do you have?
- Is ISP Modem/Service using Dynamic or Static WAN IP addressing?
- What ISP Modem service link speeds UP and Down do you have? Link> Speed Testing Sites (http://forums.dlink.com/index.php?topic=48352.0)
Wireless Configurations
Links>Wireless Installation Considerations (http://forums.dlink.com/index.php?topic=48327.0) and Managing Signal Congestion (http://forums.dlink.com/index.php?topic=53228.0) and Good Neighbour Policy (http://forums.dlink.com/index.php?topic=10634.0)
- Ensure the default (dlink) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios. Can be anything and not something that's already in use by any neighbouring WiFi routers. Under Setup/Wireless/Manual.
- What wireless modes are you using?
- 2.4Ghz and 5Ghz routers: Try single mode G or N or mixed G and N on 2.4Ghz and single mode N or AC on 5Ghz?
- Channel Width set for Auto 20/40Mhz.
- Try setting a manual Channel (http://en.wikipedia.org/wiki/Wireless_channels) to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions. Try channel 48 or 149 on 5Ghz.
- What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES (http://en.wikipedia.org/wiki/Advanced_Encryption_Standard), so you might want to try TPIK (http://en.wikipedia.org/wiki/Temporal_Key_Integrity_Protocol) only or Auto TPIK and AES.
- Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
- Any other WiFi routers in the area that maybe causing interferences? Link> Use InSSIDer (http://www.techspot.com/downloads/5936-inssider.html) to find out. How many? Use v3, its free.
- If you have any of these options, Try turning OFF or ON Short GI (http://www.smallnetbuilder.com/wireless/wireless-features/30969-what-do-80211ns-optional-features-mean-for-you), WLAN Partition, Extra Wireless Protection and HT 20/40 Co-existence if you have it. Also testing with HT20/40Mhz Co-existence enabled will impact results as well. I prefer to use this option OFF. Recommended settings are default. Under Advanced/Advanced Wireless.
Am having the exact same problem on an IPad Air 2 running 8.3 and DIR-880 running 1.02.
Did you solve this?