D-Link Forums

D-Link VPN Router => DSR-250N => Topic started by: StanKoek on December 19, 2014, 02:13:24 AM

Title: Guest network can access gui
Post by: StanKoek on December 19, 2014, 02:13:24 AM

Hello,

I recently found out my guest network on the D-Link dsr-250n can access the GUI.
I tried to find the problem myself with no luck, also searched for it on the web with also no success.
Also left a message at D-Link website asking how to do this, now been one week and still no reply.
So my question is: How can i disable the GUI to the guest network while still able to connect to it by the company network?
Hope one of u here can help me out.

Thanks,
Stan

Title: Re: Guest network can access gui
Post by: FurryNutz on December 19, 2014, 07:30:24 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?

We find that phone contact has better immediate results over using email.

Title: Re: Guest network can access gui
Post by: StanKoek on December 19, 2014, 07:50:20 AM

Thanks for the reply,

    What Hardware version is your router? Look at sticker under the router case.
Hardware version A1
    Link>What Firmware version is currently loaded? Found on the routers web page under status.
Firmware version 1.08B39_WW
    What region are you located?
Netherlands, South Holland

Next time i'll call  ::)

thanks again,
Stan

Title: Re: Guest network can access gui
Post by: FurryNutz on December 19, 2014, 07:52:58 AM

I notice there is v1.09 B32 available for this model router. You might try it and see if it resolves this...

Title: Re: Guest network can access gui
Post by: StanKoek on December 22, 2014, 01:11:27 AM

Now running on Firmware Version: 1.09B32_WW.
no changes, guest can still access GUI. Any ideas?

Title: Re: Guest network can access gui
Post by: FurryNutz on December 23, 2014, 08:25:48 AM

Ya, if it's still happening, I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.

Title: Re: Guest network can access gui
Post by: StanKoek on December 24, 2014, 02:04:03 AM

U heeft recht op telefonische ondersteuning binnen de 2 jaar garantie-periode. Na deze periode vervalt het recht op telefonische ondersteuning en kunt u ons alleen via e-mail bereiken op nl-info@dlink.com

translation:
U only have the right for phone support within 2 years of the waranty period. After this period the right for phone support will void and u can only reach us by this mail nl-info@dlink.com

Our router is now 3 years old so i have sent a mail with reply saying:

Dear customer,
 
Thank you for your email!
 
I am OOF from 22/12 til 05/01-2015, and therefore I will read and respond to my email irregurlarly.
For urgent question please send a text message to my cellular and I will respond a.s.a.p
 
All i can do now is wait for his email and continue trying myself with (maybe) some help from people on here.
also enabled telnet so i can access my router at cmd so if anyone knows anything about that, all help is welcome!

Title: Re: Guest network can access gui
Post by: FurryNutz on December 24, 2014, 01:35:33 PM

I'll see if I can dig up some help and information on this.

Please be patient.

Title: Re: Guest network can access gui
Post by: BountyHunter on July 25, 2016, 08:06:16 PM

This is an old post but someone may find it helpful. You may use the following built-in feature to control who can and cannot access Web GUI

Under: Maintenance | Administration | Web GUI Management  >> select which VLAN to allow access.

Title: Re: Guest network can access gui
Post by: FurryNutz on August 09, 2016, 02:01:59 PM

Thanks for posting this info. Hope it helps future users.  ;)