D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => ShareCenter® Add-on Applications => Topic started by: blisterbutt on January 09, 2015, 01:05:58 PM
-
Hello,
I am using firmware 1.04 which has Google Drive.......Everytime I go to enter the key provided by Google Drive, I keep getting an error message even though I have provided the correct account email and key generated via Google.
This is frustrating as I dunno how to fix or what's going on.
Some help please.......
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What region are you located?
Internet Service Provider and Modem Configurations
- What ISP Service do you have? Cable or DSL?
- What ISP Modem Mfr. and model # do you have?
What Mfr and model # host router do you have? If any.
-
My NAS 320L with this error on google driver.
hear a blackout, and when the NAS was online Google account settings Driver was off, now when I put the getKey the mistake again (Authentication Failed. Please check your Key)
?
-
I am having the same issue,
This is on a Win 7 Pro system, with DSL connection within the UK.
The 320L has previously connected once to G Drive and created the .grive file and started synchronisation. This has now halted and removal and recreation of the link and sync of account fails.
The authorisation has been removed from my google account and when I try to re-auth the landing page appear malformed as the image is a holding .img
Has anyone come accross this before or have a solution ?
-
same problem here, first time account created and sync, then the account was deleted and no way to create a new sync.
Authentication Failed. Please check your Key. firmware 1.04
-
I'm located in the US specifically near Chicago and I have Comcast as an ISP.
I've used three different browsers but same issue on an XP system.
-
so far so good in the UK so does not seem to affect everybody, just wish you could specify a folder in Google drive rather than the whole thing
-
I'm having the same issue.
I can go through the set up and it seems to work but then you hit the Syns button and it says failed but some of the pics are there?
Could this be a port problem in my router?
OK I have created a new folder on the NAS and then added a couple of pics and hit Sync. The NAS said it had failed but they where on the Google Drive. I then set it to hourly and then added a new folder within the original with a few more pics in it and waited. At the time it did sync the new folder and pics within but still said it failed.
Now it seems to work but the worry for me is if I upgrade to 1tb and sync all my images and videos (20000+) I wont know if the sync was successful.
Can this be sorted please as I am not upgrading until it is.
-
Hi
After I upgraded firmware, my very well functionel Google drive doesn't work anymore.
I upgraded from v1.04b008 to v1.04b012 and after that i experience the same as blisterbutt
The Google drive setup access the Google page where I get the Key for my account, but when I paste it, DNS-320L states that it doesn't wotk.
Just for info: I'm located in Europe
Regards,
Thomas
-
I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
-
Hi
Dlink support suggested to make a factory reset, settings back to default, and that made the trick.
Now google drive syncronizing works again.
regards,
Thomas
-
Glad it worked.
Enjoy. ;)
Hi
Dlink support suggested to make a factory reset, settings back to default, and that made the trick.
Now google drive syncronizing works again.
regards,
Thomas
-
Hello,
if you do not understand the problem of evil to google drive should do a reset the NAS?
The first days I worked well in a while ... now not
We lose all the settings to make the reset?
This is not a solution ... :'(
regards
-
Looks like just one reset of the NAS and set up from scratch resolve this one users problem with Google drive. You should attempt this proceedure and report back if G drive stops again. If it does then, additional troubleshooting steps maybe needed.
- What region are you located?
- What Mfr and model is the main host router?
Internet Service Provider and Modem Configurations
- What ISP Service do you have? Cable or DSL?
- What ISP Modem Mfr. and model # do you have?
Hello,
if you do not understand the problem of evil to google drive should do a reset the NAS?
The first days I worked well in a while ... now not
We lose all the settings to make the reset?
This is not a solution ... :'(
regards
-
Hello,
I just did a firmware upgrade as they told me the technical service. And a reset to factory.
DLINK_DNS320L(LW).1.04b12(3.07.1226.2014)
Follow all the same.
Google drive authorization requests, give me the number of key, but google does not authorize the application.
The data requested by me as the I send?
thanks
-
You might want to contact Google and ask them about the specific of the handling and configuration of there SW. If they can't help resolve this then I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
-
Same Problem:
At my Google account , the application appears not allowed, but i have pressed the accept button and generated the code.
Also I tried with an VPN, taking IP direción from some countries but it doesn´t work. :'(
Error: "Authentication Failed. Please chek your key"
Current NAS Firmware Version: 1.04
Any idea?
-
What is the Mfr and model of the ISP modem and main host router?
You might want to contact Google and ask them about the specific of the handling and configuration of there SW. If they can't help resolve this then I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Same Problem:
At my Google account , the application appears not allowed, but i have pressed the accept button and generated the code.
Also I tried with an VPN, taking IP direción from some countries but it doesn´t work. :'(
Error: "Authentication Failed. Please chek your key"
Current NAS Firmware Version: 1.04
Any idea?
-
Hello;
I have ADSL ISP in Spain, and my router is an Cisco EPC3928AD.
I will do some test whit this, and if i have found any solution i will post here.
Thanks!
What is the Mfr and model of the ISP modem and main host router?
You might want to contact Google and ask them about the specific of the handling and configuration of there SW. If they can't help resolve this then I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Same Problem:
At my Google account , the application appears not allowed, but i have pressed the accept button and generated the code.
Also I tried with an VPN, taking IP direción from some countries but it doesn´t work. :'(
Error: "Authentication Failed. Please chek your key"
Current NAS Firmware Version: 1.04
Any idea?
-
Keep us posted...
-
Hi Again,
I´m doing some tests and, if i specify another e-mail account; it works.
Maybe, it´s something with the validation at the user side ? At my Old Google account , the application appears not allowed, but yes at the new mail account and it works (see the message: "grive Tiene acceso a Documentos de Google " )
It´s possible that if i have revoked the app once, it will never validate again?
(I can try to help to chek the code of the plugin)
Regards.
Hello;
I have ADSL ISP in Spain, and my router is an Cisco EPC3928AD.
I will do some test whit this, and if i have found any solution i will post here.
Thanks!
What is the Mfr and model of the ISP modem and main host router?
You might want to contact Google and ask them about the specific of the handling and configuration of there SW. If they can't help resolve this then I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Same Problem:
At my Google account , the application appears not allowed, but i have pressed the accept button and generated the code.
Also I tried with an VPN, taking IP direción from some countries but it doesn´t work. :'(
Error: "Authentication Failed. Please chek your key"
Current NAS Firmware Version: 1.04
Any idea?
-
Well, but when i want to sync i haave this messages:
Last Update Time Running...
Last Update Time 2015/05/11 20:15 Fail
And , it fails.
Somebody has the same issue?
Hi Again,
I´m doing some tests and, if i specify another e-mail account; it works.
Maybe, it´s something with the validation at the user side ? At my Old Google account , the application appears not allowed, but yes at the new mail account and it works (see the message: "grive Tiene acceso a Documentos de Google " )
It´s possible that if i have revoked the app once, it will never validate again?
(I can try to help to chek the code of the plugin)
Regards.
Hello;
I have ADSL ISP in Spain, and my router is an Cisco EPC3928AD.
I will do some test whit this, and if i have found any solution i will post here.
Thanks!
What is the Mfr and model of the ISP modem and main host router?
You might want to contact Google and ask them about the specific of the handling and configuration of there SW. If they can't help resolve this then I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Same Problem:
At my Google account , the application appears not allowed, but i have pressed the accept button and generated the code.
Also I tried with an VPN, taking IP direción from some countries but it doesn´t work. :'(
Error: "Authentication Failed. Please chek your key"
Current NAS Firmware Version: 1.04
Any idea?
-
You may want to contact Google and or D-Link on the phone and ask them about this issue...
Let us know if you find out anything please.
-
Well, but when i want to sync i haave this messages:
Last Update Time Running...
Last Update Time 2015/05/11 20:15 Fail
And , it fails.
Somebody has the same issue?
Yep, same... guess goodbuy GD support :(
-
You may want to contact Google and or D-Link on the phone and ask them about this issue...
Let us know if you find out anything please.
Well, but when i want to sync i haave this messages:
Last Update Time Running...
Last Update Time 2015/05/11 20:15 Fail
And , it fails.
Somebody has the same issue?
Yep, same... guess goodbuy GD support :(
-
have a I have a NAS dlink DNS 320L but i can not do it synchronizing with the driver google give the following error "Last Update Time 06/05/2015 16:21 Fail" hedge someone how to solve this ??
-
I presume this maybe a Google issue at the moment so let us know how it goes with Google.
have a I have a NAS dlink DNS 320L but i can not do it synchronizing with the driver google give the following error "Last Update Time 06/05/2015 16:21 Fail" hedge someone how to solve this ??
-
Hi! I telnet my dlink NAS
sh-4.1# cd /mnt/HD/HD_a2/GoogleDrive
sh-4.1# ./grive -Vq
config file name "./.grive"
last sync time: 1970-01-01T00:00:00.000Z
Getting abouts
exception: /home/andrewtsai/D-Link/unic-gpl/grive-0.3.0-pre/libgrive/src/protocol/AuthAgent.cc(174): Throw in function long int gr::AuthAgent::CheckHttpResponse(long int, const std::string&, const gr::http::Header&)
Dynamic exception type: N5boost16exception_detail10clone_implIN2gr4http5ErrorEEE
[PN2gr4http6UrlTagE] = https://docs.google.com/feeds/metadata/default
[PN2gr4http9HeaderTagE] = Authorization: Bearer ya29.SwIvoLATKmg3O9_nkV**********************
GData-Version: 3.0
[PN2gr4http15HttpResponseTagE] = 400
The problem is with grive... It doesn't work anymore.
Maybe I should open a new topic...
PS who is andrewtsai?
EDIT: I saw on linkedin he no longer works in D'Link :D
-
You may want to contact Google and or D-Link on the phone and ask them about this issue...
Let us know if you find out anything please.
http://forums.dlink.com/index.php?topic=64699.0 (http://forums.dlink.com/index.php?topic=64699.0)
Hi! I telnet my dlink NAS
sh-4.1# cd /mnt/HD/HD_a2/GoogleDrive
sh-4.1# ./grive -Vq
config file name "./.grive"
last sync time: 1970-01-01T00:00:00.000Z
Getting abouts
exception: /home/andrewtsai/D-Link/unic-gpl/grive-0.3.0-pre/libgrive/src/protocol/AuthAgent.cc(174): Throw in function long int gr::AuthAgent::CheckHttpResponse(long int, const std::string&, const gr::http::Header&)
Dynamic exception type: N5boost16exception_detail10clone_implIN2gr4http5ErrorEEE
[PN2gr4http6UrlTagE] = https://docs.google.com/feeds/metadata/default
[PN2gr4http9HeaderTagE] = Authorization: Bearer ya29.SwIvoLATKmg3O9_nkV**********************
GData-Version: 3.0
[PN2gr4http15HttpResponseTagE] = 400
The problem is with grive... It doesn't work anymore.
Maybe I should open a new topic...
PS who is andrewtsai?
EDIT: I saw on linkedin he no longer works in D'Link :D
-
I've been trying to do the same but could not get the included add-on working. I download and installed Grive2 and was able to sync my GoogleDrive files. Although it took a lot of retries to get them all synced, but now it seems to be stable.
have issues with the time showed in the logs and getting the vtcron to schedule the synchronization.
-
Everything seems to connect up for me but when I try to sync it just states error!
2016/03/17 17:00 Fail
-
If you are talking about the built googledrive in firmware - it is a question in the Firmware section. If the addon grive2 - please information for details.
-
I found the solution for error message "Authentication Failed. Please check your Key." for my DNS-320L firmware v1.08 for build in GoogleDriveBackups
The problem is linked to the account name already stored, to resolve adding number after account, for example.
A workaround can be added a number after the email address of the account for example.
But the final solution in to remove the account name already stored.
Enable SSH e connect.
View file in /mnt/HD_a4/.systemfile/sched_gdrive, by use cat comand.
cd /mnt/HD_a4/.systemfile/sched_gdrive
cat account_list
cat sched_gdrive.xml
If the "account_list" file if it contains the "hidden" account names not present in "sched_gdrive.xml" this are not listed on the web page, these e-mail account can not be added and they return an authentication error.
"account_list" and "sched_gdrive.xml" must contain the same accounts for no problems.
I have in "account_list" a e-mail account not present in web page list.
I delete all account in web page.
I rename "account_list" in "_account_list_1".
Reboot the NAS.
Recreate the accounts.
I think there is possible solve without delete all account, but may be able to modify "account_list" via SSH.
Or by using PC share to PC the file modify and substitute.
I suggest to reboot NAS after substitute the file.
Hi
-
Nice work. Hope this helps future users...
I found the solution for error message "Authentication Failed. Please check your Key." for my DNS-320L firmware v1.08 for build in GoogleDriveBackups
The problem is linked to the account name already stored, to resolve adding number after account, for example.
A workaround can be added a number after the email address of the account for example.
But the final solution in to remove the account name already stored.
Enable SSH e connect.
View file in /mnt/HD_a4/.systemfile/sched_gdrive, by use cat comand.
cd /mnt/HD_a4/.systemfile/sched_gdrive
cat account_list
cat sched_gdrive.xml
If the "account_list" file if it contains the "hidden" account names not present in "sched_gdrive.xml" this are not listed on the web page, these e-mail account can not be added and they return an authentication error.
"account_list" and "sched_gdrive.xml" must contain the same accounts for no problems.
I have in "account_list" a e-mail account not present in web page list.
I delete all account in web page.
I rename "account_list" in "_account_list_1".
Reboot the NAS.
Recreate the accounts.
I think there is possible solve without delete all account, but may be able to modify "account_list" via SSH.
Or by using PC share to PC the file modify and substitute.
I suggest to reboot NAS after substitute the file.
Hi