D-Link Forums

The Graveyard - Products No Longer Supported => Other D-Link Products => Topic started by: loudroom on April 15, 2015, 12:07:43 AM

Title: CANT Port forward on the DWR-922 _ HELP!!!!!_
Post by: loudroom on April 15, 2015, 12:07:43 AM

Hi Guys.

Im in need of some help. I recently purchased the DWR-922 LTE.
The idea is to use it for a remote CCTV system.
I have port forwarded many times on different routers, but on the DWR-922 i just cant work it out, and its driving me crazy.
I am hoping somebody out there thinks im stupid and can give me a simple fix for my problem.

In am trying to open ports for the NVR on ip 192.168.1.151
Ports needed 34567 and 34599. normally i just open range of 34500-34600
This is normally all i need to do.

With the attached photo, i tried to open ports 34599, 34567, 34500-34600
i have tried every combination of ports, this photo shows what i have been doing in general.

There was no conflict opening up ports 34599, 34567 and range 34500-34600

On the DWR-922 it does not have a port-forwarding option, but instead the virtual server.

Please help, and thanks in advance for any help.

This is a link to the DWR-922 Manual
http://files.dlink.com.au/Products/DWR-922/Manuals/DWR-922_A2_Manual_v1.00%28WW%29.pdf
(http://loudroom.com.au/dwr922.jpg)

Title: Re: CANT Port forward on the DWR-922 _ HELP!!!!!_
Post by: FurryNutz on April 16, 2015, 07:27:29 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?
• Enable uPnP (http://en.wikipedia.org/wiki/Upnp) and Multi-cast Streaming (http://en.wikipedia.org/wiki/Multicast) under Advanced/Networking. Disable uPnP for testing Port Forwarding (http://forums.dlink.com/index.php?topic=4235.0) rules

Title: Re: CANT Port forward on the DWR-922 _ HELP!!!!!_
Post by: loudroom on April 16, 2015, 02:50:37 PM

Hi Thanks for your reply.

H/W version A2
F/W version : v1.00(AU)
F/W Build 2014-11-11

Located in Australia

We are using a 4G service, with the DWR-922.
Not using and ISP Modem.

We are using the DWR-922 as a 4G modem,
Just need to get the port forwarding working.

Hope this helps,

Title: Re: CANT Port forward on the DWR-922 _ HELP!!!!!_
Post by: FurryNutz on April 17, 2015, 07:46:26 AM

Try some of the suggestions...see if disabling uPnP helps...if not, I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.