D-Link Forums

D-Link VPN Router => DSR-250N => Topic started by: simpsonehh on April 21, 2015, 04:48:02 PM

Title: licensedRun - in the logging output
Post by: simpsonehh on April 21, 2015, 04:48:02 PM

hello,

I enabled more logging and to check what is going on with the 250N.  the device is a few months old.
I have several entries for this and would like to know what it means.

[DSR-250N-]Tue Apr 21 17:38:33 2015(GMT-0500) [DSR-250N-][System][PLATFORM] licensedRun:338: Not able to accept connection from socket with newfd :-1 err:4:Interrupted system call


I also have these but been reviewing this post:  ( http://forums.dlink.com/index.php?topic=59242.0 )
[DSR-250N-]Tue Apr 21 17:37:23 2015(GMT-0500) [DSR-250N-][Kernel][KERNEL] [86674.600000] <sppe_cmd_arp> Fail to read IPv4 ARP entry, IP 0x0a0a0a5c
[DSR-250N-]Tue Apr 21 17:37:23 2015(GMT-0500) [DSR-250N-][Kernel][KERNEL] [86676.230000] <sppe_cmd_arp> Fail to read IPv4 ARP entry, IP 0x0a0a0a53
[DSR-250N-]Tue Apr 21 17:37:23 2015(GMT-0500) [DSR-250N-][Kernel][KERNEL] [86676.630000] <sppe_cmd_arp> Fail to read IPv4 ARP entry, IP 0x0a0a0a4c




thanks in advance.

Title: Re: licensedRun - in the logging output
Post by: FurryNutz on April 22, 2015, 07:45:48 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
• What region are you located?

Title: Re: licensedRun - in the logging output
Post by: simpsonehh on April 22, 2015, 04:50:50 PM

running the 2.01_WW code
hw v A2
USA

Title: Re: licensedRun - in the logging output
Post by: FurryNutz on April 23, 2015, 06:50:56 AM

• Was a Factory Reset performed before and after any firmware updates then set up from scratch?

>FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)

Title: Re: licensedRun - in the logging output
Post by: simpsonehh on April 25, 2015, 05:56:37 PM

Hello,
I do not recall if before hand was done. 

I am pretty sure that after the update, a reset was done.

I can do another reset as the configuration is not detailed.  would that be recommended. 

is there a way to determine what the licenserun is referring to?

thanks.

Title: Re: licensedRun - in the logging output
Post by: FurryNutz on April 26, 2015, 09:00:35 AM

You'll need to contact D-Link support and ask them what this means or if it's impacting operation of the router...

Let us know how it goes...