D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320L => Topic started by: SteveH0773 on May 09, 2015, 11:40:37 AM

Title: DNS-320L Dead - Replacement ordered
Post by: SteveH0773 on May 09, 2015, 11:40:37 AM

Hi All,
A recent power cut seems to have fried my 3 year old 320L, the power light flashes for ever and the drives don't start up. At this point, I am assuming the drives are OK - It was idle and drives not spinning when the power went down. It behaves the same with no drives installed.

As I was happy with the 320 over the 3 years, I have ordered a replacement - My question is, how do I install the drives and configure volumes without formatting the drives with my data on them? The setup was very simple... Both disks were single volumes, no RAID and scheduled backups from one to the other.

Title: Re: DNS-320L Dead - Replacement ordered
Post by: JavaLawyer on May 12, 2015, 04:54:48 AM

If your new ShareCenter is the same model and assuming your data volumes were not damaged, you should be able to simply install the HDDs in the new ShareCenter and power-up.

Recommendations:


• Install the same FW version on the new ShareCenter that you last used on the old ShareCenter
• Install the HDDs in the same order as the old ShareCenter (i.e. Make sure the HDD from Slot-1 of the old ShareCenter is installed in Slot-1 of the new ShareCenter). I always recommend labeling the HDDs with a marker so the HDD locations don't get muddled.