D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-890L => Topic started by: Semos on July 26, 2015, 11:52:31 AM
-
Hello guys
I have Dlink router 815 and I configured the DDNS sittings with "dyndns" service I forward the DVR port and everything working perfectly , Recently I bought new DIR 890L , I did the same sittings : Dydns , port forward , virtual server , the dvr will work remotely for only 2-3 days then the external IP change the router does not update the new ip .
router FW:FW1.07.B09
HARDWARE :A1
DNS STATUS :Connected
I tried again with deferent host name ,still the same issue , any idea ?
thanks
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What region are you located?
- Are you wired or wireless connected to the router?
- Has a Factory Reset (http://blog.dlink.com/what-is-a-reset-button-when-should-i-use-it) been performed?
- Was a Factory Reset performed before and after any firmware updates then set up from scratch?
Link> >FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)
Internet Service Provider and Modem Configurations
- What ISP Service do you have? Cable or DSL?
- What ISP Modem Mfr. and model # do you have?
Router and Wired Configurations
Some things to try: - Log into the routers web page at 192.168.0.1. Use IE, Opera or FF to manage the router. Besure to log into the Admin account on the router.
- Turn on or off DNS Relay (http://forums.dlink.com/index.php?topic=45143.0) under Setup/Networking. Link>Finding Faster DNS Addresses using Name Bench (http://forums.dlink.com/index.php?topic=53222.0) and input new DNS addresses under Setup/Internet/Manual.
- Setup DHCP (http://forums.dlink.com/index.php?topic=58017.0) reserved IP addresses for all devices ON the router. Setup/Networking. This ensures each devices gets its own IP address when turned on and connected, eliminates IP address conflicts and helps in troubleshooting and maintain consistency for applications that need to connect as well as mapped drives.
- Ensure devices are set to auto obtain an IP address.
-
Any status on this? ???
Hello guys
I have Dlink router 815 and I configured the DDNS sittings with "dyndns" service I forward the DVR port and everything working perfectly , Recently I bought new DIR 890L , I did the same sittings : Dydns , port forward , virtual server , the dvr will work remotely for only 2-3 days then the external IP change the router does not update the new ip .
router FW:FW1.07.B09
HARDWARE :A1
DNS STATUS :Connected
I tried again with deferent host name ,still the same issue , any idea ?
thanks
-
Hi Again
just for your info , I Know its a quite late feedback :-\
my issue solved ,at that time I kept refresh the external ip for three weeks twice a week until the new firmware released.
since then everything working fine .
-
Glad it's working good now. Enjoy. ;)