D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320L => Topic started by: FurryNutz on August 10, 2015, 09:35:51 AM
-
D-Link posted DNS-320L firmware version v1.06b03, which can be downloaded here: DNS-320L - Firmware v1.06b03 Download (http://support.dlink.com/ProductInfo.aspx?m=DNS-320L).
- DNS-320L - Cumulative Firmware Release Notes (http://forums.dlink.com/index.php?topic=51629.0)
- DNS ShareCenter - How to Upgrade ShareCenter Firmware (http://forums.dlink.com/index.php?topic=49100.0)
- DNS ShareCenter - Important Posts & Information (http://forums.dlink.com/index.php?topic=58137.0)
- DNS ShareCenter - Beta Firmware Terms and Conditions (http://forums.dlink.com/index.php?topic=58285.0)
Please post your comments and observations as a reply to this thread.
:) ;) :)
-
It worked fine. Don't notice any new features, but then I only use SMB file sharing and nothing else.
All seems good.
-
There wasn't any new featured. Just seem to fix something. Glad it's working for you. Enjoy. ;)
It worked fine. Don't notice any new features, but then I only use SMB file sharing and nothing else.
All seems good.
-
in mylink does not suggest new release.....las 1.05.. already dlink upgrading their systems?
-
Huh? ???
in mylink does not suggest new release.....las 1.05.. already dlink upgrading their systems?
-
If I connect to the web page of mydlink https://es.mydlink.com/device Iast time it says I have 1.04 release and there is an upgrade firmware..
Now I have 1.05 release and there is a 1.06b3 firmwarre available but no firmware update note when I connect..
-
Huh? ???
in mylink does not suggest new release.....las 1.05.. already dlink upgrading their systems?
Maybe it's for a particular region/country (like we discussed before)
EU still shows as per image
(http://i.imgur.com/M4HFxNH.jpg)
-
I've been installed just now and everything it's fine (for now :D)
-
Current NAS Firmware Version 1.06
Firmware Date 07/28/2015
Server Address www.dlinkddns.com
Status Updated Failure
Last Updated Time:2015-08-31 23:52:44
Next Update Time:2015-09-01 00:02:44
Is this right failed but update to date?
-
Since I've skipped a few FW versions and went straight to this one, can someone post the changelogs since the thread that is supposed to do that stops at 1.0.4?
Thanks!
-
Change logs should be included with the FW file...
Since I've skipped a few FW versions and went straight to this one, can someone post the changelogs since the thread that is supposed to do that stops at 1.0.4?
Thanks!
-
Change logs should be included with the FW file...
Not with 1.06, it's not there... I wonder why the changelog thread is locked and not updated.
-
Try here:
http://support.dlink.com/ProductInfo.aspx?m=DNS-320L (http://support.dlink.com/ProductInfo.aspx?m=DNS-320L)
-
Try here:
http://support.dlink.com/ProductInfo.aspx?m=DNS-320L (http://support.dlink.com/ProductInfo.aspx?m=DNS-320L)
Ah, I saw that, but I thought there were other vrersions between 1.04 and the current 06b. I see now that there don't appear to be any, so that'll do :)
Thanks!
-
;)
-
Local Backup Settings
Recurring Backup can you add by minute.
is hard to add one by one.
-
FunPlug won't install.
1.06b3
Problems Resolved:
- Fixed the following Security vulnerability
o Directory traversal found under /mnt directory
is this have a cause? fixing /mnt directory fun_plug won't detect?
if [[ ! -d /mnt/HD_a2 ]]; then
FFP_HDD=/mnt/HD/HD_a2
else
FFP_HDD=/mnt/HD_a2
fi
-
I recommend that you post this question here if you haven't already:
http://forums.dlink.com/index.php?board=423.0 (http://forums.dlink.com/index.php?board=423.0)
FunPlug won't install.
1.06b3
Problems Resolved:
- Fixed the following Security vulnerability
o Directory traversal found under /mnt directory
is this have a cause? fixing /mnt directory fun_plug won't detect?
if [[ ! -d /mnt/HD_a2 ]]; then
FFP_HDD=/mnt/HD/HD_a2
else
FFP_HDD=/mnt/HD_a2
fi
-
To answer koadrian's question above for those who may be interested, it appears as though D-Link has intentionally removed fun_plug functionality moving forward starting with firmware 1.06b03 as stated by the line "Fun_plug script was removed and no longer to be supported" which is found in the 1.06b03 release notes on D-Link's Canadian website (ftp://ftp.dlink.ca/PRODUCTS/DNS-320L/DNS-320L_REVA_RELEASENOTES_1.06.PDF).
Unfortunately the release notes on D-Link's USA website do not have this informative line in them which is where the confusion/frustration comes in, but because the firmware binaries you download from D-Link's Canadian and USA websites are identical (both binaries have an MD5 hash of "0216D3AFF50FF31545F160A0226EDE3F") then therefore the USA 1.06b03 binary must also have the fun_plug functionality removed even though it does not mention it (the USA release notes are at "ftp://ftp2.dlink.com/BETA_FIRMWARE/DNS-320L/REVA/DNS-320L_REVA_FIRMWARE_PATCH_NOTES_1.06.B03_EN.PDF").
So if you use fun_plug, do not "upgrade" to firmware 1.06b03.
-
Hi,
This may not be specific to Firmware v1.06b03 but I noticed an issue with P2P down loads operating in schedule mode.
I can add a torrent from file, but it cannot be delteted, started or stopped, unless I logon at a time when the schedule is on.
[Remove Completed] does not work either even after download is complete unless I do this at a time when the scheule is on.
Perhaps this is a bug to be fixed in the next release.
Kind regards,
Jaya
-
Using this version, ShareCenter (mysurveillance) still can't recognize my DCS-2136L camera. I thought that its release note indicated to recognize newer IP cameras. Anyway, as generic model still works.
-
Anyone else having difficulties with MyDlink? The device reports that it's logged in alright, but when I vitit the web page (either on the web or through mobile) it says no devices are connected...
[EDIT] After a couple of reboots (not with the first, though) it seems to have stuck at last. I can now access it!
-
Hello,
Try to use Remot Backup with DNS320.
Backup stays at 99% for days. I have to restart to display stop/start button.
I try to do a backup from distant NAS (DNS 320) to local but only files and directories are restored, not the files on the directories.
When you create a task, clic on start/stop button not display again the stop button (display "-" and no action is possible. You have to restart to display the button again).
I dont know if this came with the 1.06b03 as i had not try with older FW.
-
Another problem with remote backup comes to mind. As soon as you enable remote backup, you can SSH to your DNS320 and logon as root without requiring password. Just type 'root' as username and it will not prompt you for any password!
-
just wanted to ask trying to download the my surveilance on this website
http://support.dlink.com/ProductInfo.aspx?m=DNS-320L which i trying to get the 2.05 which works on 1.06 fw ver
but i was unable to download the file! the link was down and or broken can someone let me know if there is other link availble for my surveilance 2.05
-
Try this link:
ftp://ftp2.dlink.com/PRODUCTS/DNS-320L/REVA/DNS-320L_REVA_MYSURVEILLANCE_PACKAGE_2.05.ZIP (ftp://ftp2.dlink.com/PRODUCTS/DNS-320L/REVA/DNS-320L_REVA_MYSURVEILLANCE_PACKAGE_2.05.ZIP)
The Link is malformed. I've notified D-Link about it.
Thank you.
just wanted to ask trying to download the my surveilance on this website
http://support.dlink.com/ProductInfo.aspx?m=DNS-320L which i trying to get the 2.05 which works on 1.06 fw ver
but i was unable to download the file! the link was down and or broken can someone let me know if there is other link availble for my surveilance 2.05
-
Thank you so much!!
Try this link:
ftp://ftp2.dlink.com/PRODUCTS/DNS-320L/REVA/DNS-320L_REVA_MYSURVEILLANCE_PACKAGE_2.05.ZIP (ftp://ftp2.dlink.com/PRODUCTS/DNS-320L/REVA/DNS-320L_REVA_MYSURVEILLANCE_PACKAGE_2.05.ZIP)
The Link is malformed. I've notified D-Link about it.
Thank you.
just wanted to ask trying to download the my surveilance on this website
http://support.dlink.com/ProductInfo.aspx?m=DNS-320L which i trying to get the 2.05 which works on 1.06 fw ver
but i was unable to download the file! the link was down and or broken can someone let me know if there is other link availble for my surveilance 2.05
-
Let us know how it works out for you. ;)
-
works fine without problem at this time!! will let you know if something came up
-
Enjoy. ;)
-
Hello. A quick question. Is this for rev A3?
Thanks
Edit: ah stupid question. The release notes say A1/A2/A3 :)
-
Any v1.## is for Rev A models only.
Hello. A quick question. Is this for rev A3?
Thanks
Edit: ah stupid question. The release notes say A1/A2/A3 :)
-
Hi All,
I saw this on DLINK Website >> This ShareCenter storage device has a storage capacity of up to 4TB (greater capacities supported with future firmware release) <<<< How much storage capacity I can insert on a DNS 320L ? Given that i update the firmware ?
-
Hello,
Bought a D-Link ShareCenter DNS-320L last week. It worked normally until today when I installed the latest firmware from here: http://support.dlink.com/ProductInfo.aspx?m=DNS-320L
As it says there, the last version is 1.06.B03.
The installation was done successfully but next time when I tried to access my NAS it didn't let me. In the browser (Windows 10, Chrome), for instance, I pass the login screen, but then nothing, it says "ERR_CONNECTION_REFUSED".
I see it connected to my network but it keeps asking for user and password and regardless of what credentials I put there, I cannot login.
I see it when I run the installation app but now it gets stuck when I click Next after setting the password.
The blue led is working normally.
Tried Hard Reset, but with no result.
What should I do to make it work?
LATER EDIT: When I access the NAS from my phone, I pass the login screen, I can enter the interface, but all I got is the 3 buttons (Home, Applications, Management) with no functionality on neither of them. And then I can't do anything, can't access the data or the settings.
Thanks in advance!
-
PC Web Browser Configurations
What browser are you using?
Try Opera or FF? I
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Hello,
Bought a D-Link ShareCenter DNS-320L last week. It worked normally until today when I installed the latest firmware from here: http://support.dlink.com/ProductInfo.aspx?m=DNS-320L
As it says there, the last version is 1.06.B03.
The installation was done successfully but next time when I tried to access my NAS it didn't let me. In the browser (Windows 10, Chrome), for instance, I pass the login screen, but then nothing, it says "ERR_CONNECTION_REFUSED".
I see it connected to my network but it keeps asking for user and password and regardless of what credentials I put there, I cannot login.
I see it when I run the installation app but now it gets stuck when I click Next after setting the password.
The blue led is working normally.
Tried Hard Reset, but with no result.
What should I do to make it work?
LATER EDIT: When I access the NAS from my phone, I pass the login screen, I can enter the interface, but all I got is the 3 buttons (Home, Applications, Management) with no functionality on neither of them. And then I can't do anything, can't access the data or the settings.
Thanks in advance!
-
Thanks for the reply. I am using Chrome. And, miraculously, after I hit refresh a few times, it started to work again with no problems until now. Can't say I did something special. Cheers.
-
Be sure to clear caches before and after doing FW updates.
Enjoy.
-
Before doing the FW update, I didn't. But after, when the problem appeared, I did clear the cache, though, it didn't solve the problem. I cannot link the fix with this. But now I know what to do next time ;)
-
Roger that. Enjoy now. ;)
-
I'm so displeased with this device >:(.
I had dropouts during the copy of large amounts of small files and/or large files to the device with firmware 1.05 so I installed this firmware (1.06b03) to see if the issue has been solved. However the problem still persists.
The copy starts fine at a 30Mb/s but then drops to 0 Kb/s, continues with 7Mb/s and then drops again to 0 Kb/s and so on.....
My configuration: DNS320LW rev. A2; Windows 10 64 bit.
I'm sure that the problem isn't my network or computer because I also have a DNS320 device with fun_plug installed on it and when I start to copy onto this device I haven't got any network dropouts/problems at all; so it must be the DNS320LW.
For now I'm out of options.
Regards,
Spookycust.
-
How do you have the DNSs and PC connected? To the main host router or a swtich?
I'm so displeased with this device >:(.
I had dropouts during the copy of large amounts of small files and/or large files to the device with firmware 1.05 so I installed this firmware (1.06b03) to see if the issue has been solved. However the problem still persists.
The copy starts fine at a 30Mb/s but then drops to 0 Kb/s, continues with 7Mb/s and then drops again to 0 Kb/s and so on.....
My configuration: DNS320LW rev. A2; Windows 10 64 bit.
I'm sure that the problem isn't my network or computer because I also have a DNS320 device with fun_plug installed on it and when I start to copy onto this device I haven't got any network dropouts/problems at all; so it must be the DNS320LW.
For now I'm out of options.
Regards,
Spookycust.
-
I tried both ways: 1.) connect both devices (computer and DNS320LW) at the same switch and connect the switch to the router 2.) connect computer at the switch and the switch to the router and the DNS320LW at the router.
However either both ways caused the dropouts.
Strange since today the dropouts are gone during the copy of larger files. Yesterday I tried to copy a large amount of mp3 files onto the device and always had dropouts but today I tried to copy a large amount of FLAC files and I don't have any dropouts?
Maybe the problem occurs only if one of my other family members is online?
I will try to do some more investigation into this problem....
Thanks for the reply.
Kind regards.
Spooky.
-
Be sure that the DNS resources are not being accessed during the file copy process.
Please let us know how it goes. We are interested in what you find out.
I tried both ways: 1.) connect both devices (computer and DNS320LW) at the same switch and connect the switch to the router 2.) connect computer at the switch and the switch to the router and the DNS320LW at the router.
However either both ways caused the dropouts.
Strange since today the dropouts are gone during the copy of larger files. Yesterday I tried to copy a large amount of mp3 files onto the device and always had dropouts but today I tried to copy a large amount of FLAC files and I don't have any dropouts?
Maybe the problem occurs only if one of my other family members is online?
I will try to do some more investigation into this problem....
Thanks for the reply.
Kind regards.
Spooky.
-
Hello, I have removed this post?
Hello, I have the dns 320 lw
I just upgraded to firmware google 1.07by the drive still does not work ... any idea or solution?
I have passed this link by mail from mydlink
-
Thank you for confirming the model #.
Please refer to the following link and make mosts there:
http://forums.dlink.com/index.php?topic=64229.0 (http://forums.dlink.com/index.php?topic=64229.0)
Hello, I have removed this post?
Hello, I have the dns 320 lw
I just upgraded to firmware google 1.07by the drive still does not work ... any idea or solution?
I have passed this link by mail from mydlink