D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-2332L => Topic started by: korniza on August 25, 2015, 11:37:31 AM

Title: DCS-2332L disabing green LED
Post by: korniza on August 25, 2015, 11:37:31 AM
I can not find any option to disable the blinking green light in the front of camera. Does it exist? cheaper D-link cameras support it  ;)
Title: Re: DCS-2332L disabing green LED
Post by: RYAT3 on August 25, 2015, 12:44:12 PM
Black electrical tape.  :-\
You could put white electrical tape over top of the black   ::)
Title: Re: DCS-2332L disabing green LED
Post by: rstark18 on August 25, 2015, 12:57:41 PM
Quote from: korniza on August 25, 2015, 11:37:31 AM
I can not find any option to disable the blinking green light in the front of camera. Does it exist? cheaper D-link cameras support it  ;)
In the Maintenance Menu>Admin at the bottom of the screen "LED" on or off.
Title: Re: DCS-2332L disabing green LED
Post by: fousa on September 03, 2015, 03:37:34 AM
Quote from: rstark18 on August 25, 2015, 12:57:41 PM
Quote from: korniza on August 25, 2015, 11:37:31 AM
I can not find any option to disable the blinking green light in the front of camera. Does it exist? cheaper D-link cameras support it  ;)
In the Maintenance Menu>Admin at the bottom of the screen "LED" on or off.

It still have one light on with this LED option off.
Title: Re: DCS-2332L disabing green LED
Post by: cmontyburns on September 03, 2015, 11:53:40 AM
Which light is it?

The camera has three LED lamps on the front:

1.  The status indicator, which is bottom center on the camera face.  This one is controlled by the LED setting and will be either red or green depending on status.
2.  The WPS indicator, which is bottom right on the camera face.  As far as I know, this one will only be on if you press the WPS button on the back of the camera; it is blue when lit.
3.  The night-vision lamp, which is center right on the camera face.  This will come on depending on your settings for IR illumination, and is red.
Title: Re: DCS-2332L disabing green LED
Post by: fousa on September 04, 2015, 05:28:51 AM
Quote from: cmontyburns on September 03, 2015, 11:53:40 AM
Which light is it?

The camera has three LED lamps on the front:

1.  The status indicator, which is bottom center on the camera face.  This one is controlled by the LED setting and will be either red or green depending on status.
2.  The WPS indicator, which is bottom right on the camera face.  As far as I know, this one will only be on if you press the WPS button on the back of the camera; it is blue when lit.
3.  The night-vision lamp, which is center right on the camera face.  This will come on depending on your settings for IR illumination, and is red.

The first one.. I will confirm it at night
Title: Re: DCS-2332L disabing green LED
Post by: cmontyburns on September 05, 2015, 06:55:19 AM
For what it's worth, I was not sure I had ever tested this setting on my cameras to see if it does what it is supposed to.  So I tried it, and it does work for me.  My cameras are still on firmware 1.03.06.