D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-321 => Topic started by: kartcon on July 06, 2009, 06:21:27 PM
-
Installed my new DNS 321 without any problems, but now I'm trying to acces it via the internet. I can FTP to it via my LAN @ 192.168.1.102, but can not access it via the WAN. I have read about the router setup, port forwarding, UPnp forwarding and had made those changes, to no avail.
Is there anyone out there that can give some advice as to what I may be doing wrong or overlooking?
What URL should I be entering in my browser? (FTP://192.168.1.102 does work on my LAN, but not from an outside computer)
Additional info from the setup page of the router:
IP Address: 24.110.218.235
Subnet Mask: 255.255.254.0
Default Gateway: 24.110.218.1
DNS: 207.69.188.186, 207.69.188.187
And the DNS 321 Status page:
LAN INFO :
IP Address: 192.168.1.102
Subnet Mask: 255.255.255.0
Gateway IP Address: 192.168.1.1
Mac Address: 00:22:B0:E9:4E:49
DNS1: 207.69.188.186
DNS2: 207.69.188.187
Thanks in advance.
Art aka Kartcon
-
You would use your external IP that is being routed through your router. By the looks of it...
ftp://24.110.218.235
Connected to 24.110.218.235.
220---------- Welcome to Pure-FTPd [TLS] ----------
220-You are user number 1 of 10 allowed.
220-Local time is now 21:38. Server port: 21.
220 You will be disconnected after 2 minutes of inactivity.
User (24.110.218.235:(none)):
By the look of it your port is open and working.