D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-890L => Topic started by: chetvolpe on September 21, 2015, 09:29:02 PM
-
DIR-890L HW:A1 FW:1.08 connected to iMac OS X 10.10.5
When I enable both Ethernet and Wi-Fi on my Mac, I can not connect to internet (or the router). Any suggestions where to start.
Chet
-
Is there a chance that this two connections are linking to the same network? if so, you may want to use one or the other instead of both as this may be causing a loop on your network. When this is happening, can other devices connect to the internet?
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What region are you located?
Internet Service Provider and Modem Configurations
- What ISP Service do you have? Cable or DSL?
- What ISP Modem Mfr. and model # do you have?
Do you still have connect if you use either WiFi or Wired LAN separately?
-
Also something important to note, are you physically connected to an ethernet cable? Also, does this problem persist if Ethernet is disabled but a cable is plugged in?
-
Any status on this? ???
DIR-890L HW:A1 FW:1.08 connected to iMac OS X 10.10.5
When I enable both Ethernet and Wi-Fi on my Mac, I can not connect to internet (or the router). Any suggestions where to start.
Chet
-
Does it work on a windows pc? Might be mac issue.
-
I presume this may have been a mis-configuration issue on the behalf of the user. ::)
-
I presume this may have been a mis-configuration issue on the behalf of the user. ::)
No news is good news to me... maybe he figured it out? ???
-
I hope so. Has not been back on since posting...