D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: bonzer1again on July 07, 2009, 03:48:03 PM
-
I've just bought the DNS-323 and I'm having a few problems with it.
First some details
Firmware is version 1.07
2 x 1.5TB drives in Raid1 configuration
configured on wireless network as workgroup
static ip address
No users set; no groups set; no access permissions set; no quotas set
visible on network,
XP Pro + SP3
drives mapped...no probs yet.
My wireless router is a zyxel P-660HW-D1,
I have turned off all firewalls and antivirus (just for now) but problem still persists.
My problem is this when I go to copy files (large or small) to the DNS-323, I get an error saying
"cannot copy myfile.???: it is being used by another person or program"
or
"Cannot write data. The specified network name is no longer available" and I lose network connectivity as the link to the wireless router resets
Any help would be really appreciated...
-
What type of hard drives are you using? Model #?
When you can not copy the file to device, can you still access the devices web gui?
-
Do you have the same results on a wired network connection?
-
The 2 drives are
Seagate Barracuda 7200.11 SATA 3Gb/s 1.5-TB Hard Drive
The Web GUI stops working and it does work when wired!
-
Do you happen to have the Model # of your hard drives as well as the firmware version printed on the drives?
-
model # ST31500341AS
firmware version is CC1H
and that's for both drives
-
I've just done a full windows update on the laptop and the problem still persists.
Any suggestions?
-
So this issue is only happening when connected wirelessly correct? Do you have multiple wireless PC's you have tried this from or just 1?
-
I have tested it using a couple of laptops...same story with all of them, I have also shared out folders on the laptops and I can transfer files between the laptops, with no problem....so that should rule out my wireless router...the problem is with the D-Link, I'm sure.
-
But none of these laptops experience any issue wired correct? Just to be clear..
-
try upgrading to firmware 1.08 beta or downgrading to firmware 1.05 and see if the problem persists or disappears.
-
Except for the router, I have the same setup that you have; but, I'm not having any problems either.
Before up/downgrading your firmware, check this out...
There's supposed to be a default user named "admin" and a default group named "ALL". User "admin" is hidden and you can't delete it; but, if you want to setup groups, you must first delete group "ALL". I don't remember the details here, but you need it if you don't have any other groups. At any rate...
Create a group named "ALL" (all caps), with all rights and unlimited quota. Save; logout; re-boot. You should then be able to r/w to the NAS.
Good luck.
-
OK, I've tried everything suggested here, and a few more, still the same,a
I tried it wired and it worked!!, are there any recommended settings for it to work wirelessly....?
I think it might be the Router....
are there any recommended models of router that work best with the dns-323?
-
Any wireless router should be fine. I would look into a firmware update for your current router maybe.
-
OK,
I changed the router...everything works fine now!!, Thanks Everyone....It's great to have people to bounce questions off!!