D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320 => Topic started by: Hanzo on December 02, 2015, 12:35:43 AM

Title: DNS-320 turns off automatically
Post by: Hanzo on December 02, 2015, 12:35:43 AM

Hi

I am having problems with my dns-320 since few days it turns off automatically. When I turn it on again the light blinks.

If the device detects a lost of conectivity it turn it off?

Thanks and sorry for my english

Title: Re: DNS-320 turns off automatically
Post by: ivan on December 02, 2015, 07:05:17 AM

It sounds like you might have a problem with the power supply not being able to supply the full 12 volts under load.

To test this try and borrow a power supply (with the correct plug) that can supply 12 volts at a minimum of 4 Amps and use that.  If your DNS-320 then runs without problems you will need to get a replacement power supply.

Title: Re: DNS-320 turns off automatically
Post by: FurryNutz on December 02, 2015, 07:05:44 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your DNS? Look at the sticker behind or under the device.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the DNSs web page under status.
• What region are you located?

What Mfr and model is the main host router?
Is the DNS getting a Dynamic IP address from the main host router? I recommend using a Static IP address ON the DNS set to 192.168.#.34 or .40.
Swap out LAN cables. Link> Cat6 is recommended. (http://en.wikipedia.org/wiki/CAT6)[/li][/list]