D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: Lycan on July 10, 2009, 10:29:22 AM

Title: SecureSpot is required to be on to edit the port forwards.
Post by: Lycan on July 10, 2009, 10:29:22 AM

I need to know who you are, for those who can not make adjustments to port forward with SS disabled.

Title: Re: SecureSpot is required to be on to edit the port forwards.
Post by: Xinot on July 10, 2009, 11:20:31 AM

Quote from: Lycan on July 10, 2009, 10:29:22 AM

I need to know who you are, for those who can not make adjustments to prot forward with SS disabled.

What?  :o
I did read this few times and still was unsure what are you asking at...  ;D
Anyways, i have this pf/vs/sp problems.

Title: Re: SecureSpot is required to be on to edit the port forwards.
Post by: jason1722x on July 10, 2009, 01:53:48 PM

Quote from: Lycan on July 10, 2009, 10:29:22 AM

I need to know who you are, for those who can not make adjustments to port forward with SS disabled.

Can we assume that this will be taken care of befor the final 1.32na release?

Title: Re: SecureSpot is required to be on to edit the port forwards.
Post by: Lycan on July 10, 2009, 02:44:16 PM

No, I'm just trying to get an idea of how many people are having this issue and the details of the situation.
As far as it stands now, it's not an issue. It's a error somewhere within the handling of SS and the units UI. whether thats a firmware issue or a simple unit failure is still to be determined.

Title: Re: SecureSpot is required to be on to edit the port forwards.
Post by: cc999 on July 10, 2009, 02:48:22 PM

I have the problem, I am the one originally pointing this out with the latest firmware........

http://forums.dlink.com/index.php?topic=6364.0

Charlie C

Title: Re: SecureSpot is required to be on to edit the port forwards.
Post by: jason1722x on July 10, 2009, 02:56:39 PM

Quote from: Lycan on July 10, 2009, 02:44:16 PM

No, I'm just trying to get an idea of how many people are having this issue and the details of the situation.
As far as it stands now, it's not an issue. It's a error somewhere within the handling of SS and the units UI. whether thats a firmware issue or a simple unit failure is still to be determined.

well if it's an error of some type wouldn't you think it would need attention rather then have people come to the forum to only find out that SS has to be enabled to edit portforwarding?
If it's a glitch it's a problem. can it be reproduced in Dlink labs?

Title: Re: SecureSpot is required to be on to edit the port forwards.
Post by: Lycan on July 10, 2009, 02:59:04 PM

Thats the problem. Along with MANY of the other issues reported in these forums we don't see this failure.
I need as much information as I can get in order to address it.

Title: Re: SecureSpot is required to be on to edit the port forwards.
Post by: jdrom on July 10, 2009, 09:31:07 PM

I too have this issue.

If you want, I'd be willing to send you my configuration file even. Though I'd have to remove my PPPoE password beforehand just in case.

If I set all my PF/VS settings with SS on, save, reboot, then disable SS, my settings will stay even after reboots. However should I want to add anything, it's impossible to get the additions to save after a reboot with SS disabled.

Title: Re: SecureSpot is required to be on to edit the port forwards.
Post by: jason1722x on July 12, 2009, 09:04:53 AM

Quote from: Lycan on July 10, 2009, 02:59:04 PM

Thats the problem. Along with MANY of the other issues reported in these forums we don't see this failure.
I need as much information as I can get in order to address it.

Lycan
I'm going to stray off topic for just a second, I always see "We can't reproduce". I'm just curious as to how trouble shooting happens. If you can share info. Is there a HW revison A1/A2, A3, A4 for each config? How many people are working on issues?

Are we in the fourm the testbed ?