D-Link Forums
The Graveyard - Products No Longer Supported => Access Points / Extenders => DAP-1360 => Topic started by: crick on January 13, 2016, 04:21:33 AM
-
Hello guys,
I have two DAP-1360 in my office (as AP) and they work very well. I have a simple request... maybe for a future firmware upgrade. I don't know how to submit my request to DLINK, maybe some staff member is reading this forum...
I need an option to disable the administration gui for wireless clients so It can be only accessible via wired LAN connection.
This will prevent any wireless client to access the gui and try to force access with any kind of attack and will also hide any information about the firmware and/or hardware version (in case of known unfixed security holes). But will let me manage the device from my LAN.
It's a simple option to add like "WebGUI accessible via" with 3 options "WLAN only", "LAN only" and "LAN/WLAN".
I had a very cheap dsl modem/router years ago that had this option and was a must!
Thank you!!
My DAP-1360 si HW version C1 and firmware 3.06.
-
Thanks you for posting feedback regarding the DAP and your concerns about the DAP.
Most of D-Links wireless products are wifi enabled and designed access so that users can set them up using wireless devices should they not have a wired PC available. D-Links QRS app is setup and designed for this out of the box. Also helps in managing and configuring the DAP as well from a wireless device when a wired PC may not be available. As long as the security admin page has a PW set on the DAP, there should not be any issues unless the PW to the admin page is given out.