D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-5222L => Topic started by: FurryNutz on March 08, 2016, 06:39:00 AM

Title: DCS-5222L Rev B - Firmware Version 2.13 - Comments & Observations
Post by: FurryNutz on March 08, 2016, 06:39:00 AM
Firmware:   v2.13 B01   03/07/2016   NA Region!
Revision Info:
Problems Fixed:
1. V2.13.01 1. Updated agent to 2.0.20-b31

Get it here: Select DCS-5222L Rev B
https://www.mydlink.com/download (https://www.mydlink.com/download)

NOTE: Be sure that your wireless signal on the main host router is good and signal is strong with the camera if it's connected wirelessly. If your confident in this, upgrade via wireless with the camera can proceed. If your not confident in the wireless signal, use a wired LAN cable connection to the camera before upgrading the camera. This would help avoid any wireless FW upgrade problems.

Title: Re: DCS-5222L Rev B - Firmware Version 2.13 - Comments & Observations
Post by: kennysoeum@gmail.com on March 09, 2016, 04:28:46 PM
After upgraded to v2.13, I don't see the "Play" icon under the "setting" page on my mobile. Also, the microphone icon is gone. Any idea?
Title: Re: DCS-5222L Rev B - Firmware Version 2.13 - Comments & Observations
Post by: FurryNutz on March 11, 2016, 07:02:51 AM
What mobile platform are you using?
Try uninstalling and re-installing the app?

Quote from: kennysoeum@gmail.com on March 09, 2016, 04:28:46 PM
After upgraded to v2.13, I don't see the "Play" icon under the "setting" page on my mobile. Also, the microphone icon is gone. Any idea?
Title: Re: DCS-5222L Rev B - Firmware Version 2.13 - Comments & Observations
Post by: kennysoeum@gmail.com on March 12, 2016, 05:31:58 AM
My mobile device is iPhone 4S. I tried to upgrade using Ethernet cable  also - didn't work. Went back to v2.12 - works fine. What fixes does v2.13 have, by the way?
Title: Re: DCS-5222L Rev B - Firmware Version 2.13 - Comments & Observations
Post by: FurryNutz on March 12, 2016, 09:45:07 AM
Only one item is listed in the OP.
Title: Re: DCS-5222L Rev B - Firmware Version 2.13 - Comments & Observations
Post by: RP_UD on March 17, 2016, 12:25:07 PM
I have updated to firmware version 2.13 and I have got a problem: live video stops (the window keeps blank) and motion detection is not working.
Also MyDlink lite provides me the following error: data flow has been stopped.

The only way to make it work again is to reboot the camera.
But after a while (it is not a constant time) the problem appears again.
Can anyone help me?
thank you
robert
Title: Re: DCS-5222L Rev B - Firmware Version 2.13 - Comments & Observations
Post by: FurryNutz on April 12, 2016, 01:26:44 PM
Any status on this?  ???
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)


What Mfr and model is the main host router?
What wireless modes are you using?
What is the distance between the Camera and the main host router?
How many other wireless devices do you have connected to the main host router?

I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.22 or .52  DHCP (http://forums.dlink.com/index.php?topic=58017.0)

Test cameras with uPnP and uPnP Port Forwarding both enabled on ALL cameras: DCS Cloud (L) Series Camera Configuration and Mydlink.com (http://forums.dlink.com/index.php?topic=62395.0)
Quote from: RP_UD on March 17, 2016, 12:25:07 PM
I have updated to firmware version 2.13 and I have got a problem: live video stops (the window keeps blank) and motion detection is not working.
Also MyDlink lite provides me the following error: data flow has been stopped.

The only way to make it work again is to reboot the camera.
But after a while (it is not a constant time) the problem appears again.
Can anyone help me?
thank you
robert