D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-615 => Topic started by: lapid on April 07, 2016, 07:28:28 AM
-
Hi,
Im having some issue playing a game, they are troubleshooting and giving me explanation about packetloss, my isp says its all fine
Now the game manager are telling me to open ports, which when I do, I have no internet connection
Im behind my router DIR615 , modem DSL605EU
I opened port 80,443,6112 Under Advanced / Portforward section for game guildwars2
Any ideas what can I do ? my isp is not blocking port
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What Hardware version is your router? Look at sticker under the router case.
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
- What region are you located?
- Are you wired or wireless connected to the router?
Internet Service Provider and Modem Configurations
- What ISP Service do you have? Cable or DSL?
- What ISP Modem Mfr. and model # do you have?
- By-pass the main host router and check internet connection by connecting a wired LAN PC directly to the ISP modem to verify connection access and ISP speeds.
- Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values (http://forums.dlink.com/index.php?topic=53008.0)
- For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled.
- If the ISP modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems: Link>Double NAT (http://www.practicallynetworked.com/networking/fixing_double_nat.htm) and How NAT Works (http://computer.howstuffworks.com/nat.htm). Call the ISP and ask to see if the ISP modem can be bridged. To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Also check the routers DHCP IP address maybe conflicting with the ISP modems IP address of 192.168.0.1. Check to see if this is the same on the ISP modem, and if modem can't be bridged, change the DIR router to 192.168.1.1 or .0.254.
Example of a D-Link router configured for PPPoE with ISP Modem bridged: PPPoE Configuration on a Router (http://forums.dlink.com/index.php?topic=56344.msg219023#msg219023)
How do you have the port forwarding configured? Please post a picture if possible of the configuration rule:
Adding Screenshots In A Post (http://forums.dlink.com/index.php?topic=58120.0)
When using PF rules, be sure to disable uPnP.
-
HI
•What Hardware version is your router? Look at sticker under the router case.
•Link>What Firmware version is currently loaded? Firmware (9.04) version I
•What region are you located? Canada
•Are you wired or wireless connected to the router? wired
Internet Service Provider and Modem Configurations
•What ISP Service do you have? Cable or DSL? dsl - acanac
•What ISP Modem Mfr. and model # do you have? DSL605EU Aztech
•By-pass the main host router and check internet connection by connecting a wired LAN PC directly to the ISP modem to verify connection access and ISP speeds. I did works fine for both
•Check ISP MTU requirements, Cable is usually 1500, DSL is around 1492 down to 1472. Call the ISP and ask. Link>Checking MTU Values
•For DSL/PPPoE connections on the router, ensure that "Always ON" option is enabled. *** not sure about this part
• If the ISP modem has a built in router, ** it does not
Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. If the modem can't be bridged then see if the modem has a DMZ option and input the IP address the router gets from the modem and put that into the modems DMZ. Also check the routers DHCP IP address maybe conflicting with the ISP modems IP address of 192.168.0.1. Check to see if this is the same on the ISP modem, and if modem can't be bridged, change the DIR router to 192.168.1.1 or .0.254.
How do you have the port forwarding configured? Please post a picture if possible of the configuration rule:
Adding Screenshots In A Post
When using PF rules, be sure to disable uPnP. PF upnp ???
Ill get more details when I get home
-
Any status on this? ???