D-Link Forums
		D-Link VPN Router => DSR-250N => Topic started by: greenvomit8 on May 17, 2016, 09:31:42 PM
		
			
			- 
				Does anyone else notices significant slowness with the DSR-250N when logging is enabled? I've experienced slowness with both the router web interface and internet speeds. Once I disabled logging performance went back to normal. Have latest to now Firmware v2.11 for Rev.A2 installed.
			
- 
				- What region are you located?
- Are you wired or wireless connected to the router?
- Has a Factory Reset (http://blog.dlink.com/what-is-a-reset-button-when-should-i-use-it) been performed?
- Was a Factory Reset performed before and after any firmware updates then set up from scratch?
 Link> >FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)
 - Was the router working before any firmware updates?
 
 Can you take a capture of your internet speeds before and after using logging and post them here in the forums?
 Adding Screenshots In A Post (http://forums.dlink.com/index.php?topic=58120.0)
 
- 
				Hi FurryNutz
 
 What region are you located? Australia
 Are you wired or wireless connected to the router? Tried both wired and wireless
 Has a Factory Reset been performed? Yes
 Was a Factory Reset performed before and after any firmware updates then set up from scratch? Yes, Also I got the same result on another DSR-250N that I had in stock as a spare
 
 Link> >FW Update Process
 
 Was the router working before any firmware updates? Yes but I was having trouble with network connectivity with a site-to-site vpn as described in the following forum post so had to upgrade firmware to resolve this issue.
 http://forums.dlink.com/index.php?topic=63967.msg262961#msg262961 (http://forums.dlink.com/index.php?topic=63967.msg262961#msg262961)
 
 Speedtest with Logs enabled
 (https://dl.dropboxusercontent.com/u/2543350/Screen%20Shot%202016-04-20%20at%202.40.56%20PM.png)
 
 Speedtest with Logs disabled
 (https://dl.dropboxusercontent.com/u/2543350/Screen%20Shot%202016-05-06%20at%203.33.22%20PM.png)
- 
				I think this needs to be reviewed by D-Link support. Seems to be an issue here. I would contact them on the phone for your region and refer to this thread for there review...Let us know how it goes.