D-Link Forums

D-Link DSL Modem/Routers => Other DSL modem/routers => Topic started by: Jeromex on June 18, 2016, 08:45:49 AM

Title: How to put "any address" and "any port" in the "Inbound IP Filter" of a DSL 320
Post by: Jeromex on June 18, 2016, 08:45:49 AM

He

All is in the title

All I tried including 0.0.0.0 is not accepted

I need to open this port to any adress and any port source

Title: Re: How to put "any address" and "any port" in the "Inbound IP Filter" of a DSL 320
Post by: FurryNutz on June 18, 2016, 12:35:28 PM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your modem? Look at the sticker under modem.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the modems web page under status.
• What region are you located?

Try 0.0.0.1?

Title: Re: How to put "any address" and "any port" in the "Inbound IP Filter" of a DSL 320
Post by: Jeromex on June 20, 2016, 06:00:23 AM

It is a DSL 320B model firmware 1.05
Under the modem :
H/W ver.: Z1
F/W ver.: 1.05

région France

0.0.0.1 does not work, it returns : "invalid IP address 0.0.0.1" as usual
I saw D-Link routers' screen captures on the net where 0.0.0.0 is entered and the software writes beside that it means "Any" but not on my model  :'(

here http://setuprouter.com/router/dlink/dsl-2740r/ip-filter-30994-large.jpg
so I have not the choice PVC0, this space does not appear (?)

my modem setting page http://imgur.com/Mi6CX0U

Title: Re: How to put "any address" and "any port" in the "Inbound IP Filter" of a DSL 320
Post by: Jeromex on June 20, 2016, 07:50:29 AM

Then I tried, I tried again and again and I found that it works when I enter only a destination port, but keeping all the other fields as 0.0.0.0 or 0 fot the source port ! Yess !

Title: Re: How to put "any address" and "any port" in the Inbound IP Filter (RESOLVED)
Post by: FurryNutz on June 20, 2016, 10:28:32 AM

Thanks for posting how you got it working. Enjoy.  ;)