D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-615 => Topic started by: tubiwityu on August 05, 2016, 08:45:52 AM
-
Dear Brother and Sister
I am thama from Indonesia.
I have old DLINK DIR-615,
on Tuesday, 02 August 2016, I did the firmware update on the DIR-615 device automatically listed on the menu firmware. Once the firmware update has been completed, the DIR-615 device requires a reboot for 60 seconds. After rebooting, the power indicator light (color: orange) is always on. and on the menu network connection on my laptop there is no WIFI list of the device.
I've opened a lot of tutorials, how to reset.
Starting from the press the reset button for 30 seconds to connect a LAN cable to the laptop with the DIR-615 device, but no results at all. There is no IP on the device, the default gateway is not there, so I can not connect between the laptop and the device to reset the settings.
What should I do?
I need your help
Thanks Before and After
Regards
thama
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
Can try this:
Emergency Recovery Mode (http://forums.dlink.com/index.php?topic=44909.msg163599#msg163599)
If this doesn't work or fails, you'll need to phone contact your regional D-Link support office.
Please use this to do any future updates with D-Link routers:
Link> >FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)
-
(http://tinypic.com/r/2mm6yc5/9)
I've tried the tutorial you suggested to me, but I failed.
the current DIR-615 device, the indicator light (orange) is flashing.
permasalahanya I can not get into the device, because I can not log into ipaddress of the device. 192.168.0.1 not found,
there anything I can do? Please help
-
You did set a static IP address on the LAN wired PC and then tried to get to the 192.168.0.1 address in a browser after performing the start up actions listed in the procedure?