D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-895L => Topic started by: pastorivera on September 05, 2016, 06:17:44 AM
-
I have tried various times to upgrade the firmware on my router without success. It goes through the motions and says at the end that the update was successful but when i go back and look at the firmware date it is the same date that came with the router and is not reflecting the date of the upgraded firmware. Any ideas?
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
- What region are you located?
- Was a Factory Reset performed before and after any firmware updates then set up from scratch?
Link> >FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)
Be sure to clear browser caches before and after manually sending the FW file...
-
New FW: ;)
http://forums.dlink.com/index.php?topic=65788.0 (http://forums.dlink.com/index.php?topic=65788.0)
I have tried various times to upgrade the firmware on my router without success. It goes through the motions and says at the end that the update was successful but when i go back and look at the firmware date it is the same date that came with the router and is not reflecting the date of the upgraded firmware. Any ideas?
-
Hello,
I just bought a 895L router, I follow the instruction to update the firmware to 1.12 and do the reset and set up from scratch. Everything work for 2 hours, then the router keep rebooting itself. Can you please help and let me know what did I do wrong here? is there any setting that I missed. I went into 192.168.0.1 and login, only let me set one SSID, I don't see where it let me choose 2.4G,5.0G SSID. Any help would greatly appreciate, thanks.
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What region are you located?
- Has a Factory Reset (http://blog.dlink.com/what-is-a-reset-button-when-should-i-use-it) been performed?
- Was a Factory Reset performed before and after any firmware updates then set up from scratch?
Link> >FW Update Process (http://forums.dlink.com/index.php?topic=42457.0)
- Was the router working before any firmware updates?
Internet Service Provider and Modem Configurations
- What ISP Service do you have? Cable or DSL?
- What ISP Modem Mfr. and model # do you have?
Wireless Configurations
Links>Wireless Installation Considerations (http://forums.dlink.com/index.php?topic=48327.0) and Managing Signal Congestion (http://forums.dlink.com/index.php?topic=53228.0) and Good Neighbour Policy (http://forums.dlink.com/index.php?topic=10634.0)
- Ensure any devices with WiFi adapter drivers are updated.
- Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
- Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner (http://forums.dlink.com/index.php?topic=48327.0) to find out. How many?
- For routers with Smart Connect Technology (http://forums.dlink.com/index.php?topic=62072.0) , try disabling this feature and test. Under Wireless.
Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials (http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials)
Hello,
I just bought a 895L router, I follow the instruction to update the firmware to 1.12 and do the reset and set up from scratch. Everything work for 2 hours, then the router keep rebooting itself. Can you please help and let me know what did I do wrong here? is there any setting that I missed. I went into 192.168.0.1 and login, only let me set one SSID, I don't see where it let me choose 2.4G,5.0G SSID. Any help would greatly appreciate, thanks.
-
My router work for 4 hours, then shut down automatic and reboot itself and only the power light and the internet light are ON, the wifi light are OFF, and no network connection at all, neither wired or wifi? Any ideas?
-
Please answer the questions presented so we can better help you...