D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-2332L => Topic started by: moreaboutjesus on November 30, 2016, 08:24:10 PM
-
I have a 2332L camera and I have a strange problem. I am on the newest version of the firmware.
When my camera sends emails with the pictures, the pictures are backwards.
For example, the correct way, which it was working fine when I first bought the camera, when it sends out an email with pictures.
When opening the email, it should display pic1, then pic2 and then pic3.
My camera is sending me the pictures with pic3, then pic2 and then pic1.
How do I fix this?
-
I just did another factory reset on the camera and configured my settings from scratch again, still the same problem.
-
Which email provider are you using?
Have you gone back to the previous F/W to test?
Does your IR led stay on in Day Mode?
-
I am using gmail, as that seems to be the easiest to get it to work.
So I did another test, to rule out that it's gmail being the problem. I changed the email to my countermail.com and hotmail.com emails, so it sent emails to these two email addresses as well. Same problem, the pictures on top should be the oldest, on bottom. For example, here's the order of the pictures with their respective time stamps.
1st pic: 22:21:04
2nd pic: 22:21:03
3rd pic: 22:21:02
4th pic: 22:21:01
5th pic: 22:21:00
The order of the pictures should be exactly reversed.
Yes, I actually tried all the firmwares I can get, I tried every single one of these:
1.01.04
1.04.00
1.03.06
1.05.02
1.06.00
1.07.00
1.08.03
In regards to your last question, I'm in my room, with the room light on, as it's night currently and the IR LED is lit on solid RED.
When I first bought this camera it was working fine. Then a few months later, I updated the firmware and ever since then, it has never worked.
I tried even going back to the original firmware that the camera came with, I loaded that firmware and it still doesn't work. I can't return the camera since it's outside the return policy, it's a shame, because besides this problem, it's a good camera.
-
What FW version did you have loaded when the pictures were ordered correctly?
-
it was the original FW that came with the camera, unfortunatly, I don't have that one anymore. is there a way to get it somehow?
-
Try v1.01 here:
http://support.dlink.com/ProductInfo.aspx?m=DCS-2332L (http://support.dlink.com/ProductInfo.aspx?m=DCS-2332L)