D-Link Forums

D-Link VPN Router => DSR-250N => Topic started by: leknoppix on December 10, 2016, 09:23:23 AM

Title: Ipsec between a DSR-1000AC and DSR-250N, Lost connection
Post by: leknoppix on December 10, 2016, 09:23:23 AM

Hello All,

I'm in front of problem with interconnection between a DSR-1000ac and a DSR-250n.
I have created a policies rule in this 2 housing. I can connect these but, the link breaks from time to time preventing exchanges with the main annex.
I use the firmware 3.07_WW and I use ethernet protocol

I post my config to try to understand the problem:

Code: [Select]

IpsecIKEPolicy = {}
IpsecIKEPolicy[1] = { }
IpsecIKEPolicy[1]["IKEPolicyName"] = "School"
IpsecIKEPolicy[1]["xmlId"] = "0"
IpsecIKEPolicy[1]["Direction"] = "2"
IpsecIKEPolicy[1]["ExchangeMode"] = "0"
IpsecIKEPolicy[1]["IKEVersion"] = "2"
IpsecIKEPolicy[1]["ModeConfigStatus"] = "0"
IpsecIKEPolicy[1]["ModeConfigRecordName"] = "modeConfig"
IpsecIKEPolicy[1]["LocalIdentifierType"] = "0"
IpsecIKEPolicy[1]["LocalIdentifier"] = ""
IpsecIKEPolicy[1]["RemoteIdentifierType"] = "0"
IpsecIKEPolicy[1]["RemoteIdentifier"] = "school.dlinkddns.com"
IpsecIKEPolicy[1]["EncryptionAlgorithm"] = "31"
IpsecIKEPolicy[1]["KeyLength"] = "0"
IpsecIKEPolicy[1]["AuthAlgorithm"] = "3"
IpsecIKEPolicy[1]["AuthType"] = "0"
IpsecIKEPolicy[1]["Presharedkey"] = "****************************"
IpsecIKEPolicy[1]["DHGroup"] = "2"
IpsecIKEPolicy[1]["SALifeTime"] = "2678400"
IpsecIKEPolicy[1]["DPD"] = "1"
IpsecIKEPolicy[1]["DPDDetectionPeriod"] = "10"
IpsecIKEPolicy[1]["DPDFailureCount"] = "3"
IpsecIKEPolicy[1]["XAUTHType"] = "0"
IpsecIKEPolicy[1]["NatTraversal"] = "1"
IpsecIKEPolicy[1]["NatKeepAliveTime"] = "20"
IpsecIKEPolicy[1]["AddressFamily"] = "2"
IpsecVPNPolicy = {}
IpsecVPNPolicy[1] = { }
IpsecVPNPolicy[1]["IpsecProtocol"] = "1"
IpsecVPNPolicy[1]["TunnelOrTransport"] = "1"
IpsecVPNPolicy[1]["EnableDhcpOverIPSec"] = "0"
IpsecVPNPolicy[1]["VPNPolicyName"] = "School"
IpsecVPNPolicy[1]["PolicyType"] = "1"
IpsecVPNPolicy[1]["LocalGateway"] = "0"
IpsecVPNPolicy[1]["RemoteEndPointType"] = "1"
IpsecVPNPolicy[1]["RemoteEndPoint"] = "school.dlinkddns.com"
IpsecVPNPolicy[1]["Netbios"] = "1"
IpsecVPNPolicy[1]["Rollover"] = "1"
IpsecVPNPolicy[1]["EnableKeepAlive"] = "0"
IpsecVPNPolicy[1]["KeepAlivePeriod"] = "10"
IpsecVPNPolicy[1]["KeepAliveFailureCount"] = "3"
IpsecVPNPolicy[1]["EncryptionAlgorithm"] = "62"
IpsecVPNPolicy[1]["KeyLength"] = "0"
IpsecVPNPolicy[1]["AuthAlgorithm"] = "6"
IpsecVPNPolicy[1]["LocalNetworkType"] = "3"
IpsecVPNPolicy[1]["LocalStartAddress"] = "192.168.1.0"
IpsecVPNPolicy[1]["LocalSubnetMask"] = "255.255.255.0"
IpsecVPNPolicy[1]["RemoteNetworkType"] = "3"
IpsecVPNPolicy[1]["RemoteStartAddress"] = "192.168.80.0"
IpsecVPNPolicy[1]["RemoteSubnetMask"] = "255.255.255.0"
IpsecVPNPolicy[1]["SPIIn"] = "0x"
IpsecVPNPolicy[1]["SPIOut"] = "0x"
IpsecVPNPolicy[1]["AutoPolicyType"] = "0"
IpsecVPNPolicy[1]["SALifeTime"] = "2678400"
IpsecVPNPolicy[1]["SALifeTimeType"] = "0"
IpsecVPNPolicy[1]["PFSKeyGroup"] = "0"
IpsecVPNPolicy[1]["IKEPolicyName"] = "school"
IpsecVPNPolicy[1]["Status"] = "1"
IpsecVPNPolicy[1]["RVGStatus"] = "0"
IpsecVPNPolicy[1]["BackupPolicyName"] = ""
IpsecVPNPolicy[1]["FailbackTime"] = "30"
IpsecVPNPolicy[1]["modeConfigStatus"] = "0"
IpsecVPNPolicy[1]["ModeConfigRecordName"] = "modeConfig"
IpsecVPNPolicy[1]["AddressFamily"] = "2"
IpsecVPNPolicy[1]["AutoInitiate"] = "0"
IpsecVPNPolicy[1]["L2tpIpsecPolicy"] = "0"

Thanks in advance

Title: Re: Ipsec between a DSR-1000AC and DSR-250N, Lost connection
Post by: FurryNutz on December 29, 2016, 11:07:18 AM

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.