D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320 => Topic started by: mRgANDALF on January 07, 2017, 09:34:33 AM

Title: D-Link 320L NAS access from windows 10
Post by: mRgANDALF on January 07, 2017, 09:34:33 AM

Good Morning,

I have a D-Link 320L NAS mounted as a virtual hard drive on a Windows 10 PC and on a laptop with the same operating system. After trying to mount an FTP over the NAS, I created an FTPuser user (there was no user created until then) and from there the NAS virtual drive stopped working on both the PC and the laptop. After investigating a bit, I sensed that Windows 10 did not support this old NAS with users, so I deleted the accounts and it worked again on the laptop (after asking for a setting I do not remember) but not on the PC. Below I show the screens.

This is what the windows explorer recognizes as networked devices.

(https://k61.kn3.net/F/F/C/9/6/0/1C0.png)

We see this by clicking on D-Link 91D98D

https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png (https://k60.kn3.net/2/5/5/5/9/2/710.png)

https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png]https://k60.kn3.net/2/5/5/5/9/2/710.png (https://k60.kn3.net/2/5/5/5/9/2/710.png)

This is the windows message when you want to access Volume_1 on the PC. In the notebook, the content is accessed without having to enter a password.

https://k60.kn3.net/E/F/3/4/C/A/97A.png (https://k60.kn3.net/E/F/3/4/C/A/97A.png)

The NAS log shows failed [admin] access for the PC and a successful admin login for the laptop.

This is what the tab Properties on the PC shows.

https://k61.kn3.net/E/6/0/9/4/C/7AC.png (https://k61.kn3.net/E/6/0/9/4/C/7AC.png)
https://k60.kn3.net/D/3/6/9/F/D/358.png (https://k60.kn3.net/D/3/6/9/F/D/358.png)

And this what it shows in the Portatil (where it works well)

https://k61.kn3.net/E/1/C/1/0/1/E9A.png (https://k61.kn3.net/E/1/C/1/0/1/E9A.png)
https://k60.kn3.net/C/8/E/F/B/1/E59.png (https://k60.kn3.net/C/8/E/F/B/1/E59.png)

Clicking on change owner shows in both cases the same window.

https://k61.kn3.net/D/A/4/6/E/6/E99.png (https://k61.kn3.net/D/A/4/6/E/6/E99.png)

I think it must be a permission problem. I do not have the possibility to restore the system to a previous state because it was not configured. Any ideas?

Thank you.

Title: Re: D-Link 320L NAS access from windows 10
Post by: FurryNutz on January 09, 2017, 01:07:18 PM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your DNS? Look at the sticker behind or under the device.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the DNSs web page under status.
• What region are you located?

http://forums.dlink.com/index.php?topic=65722.0 (http://forums.dlink.com/index.php?topic=65722.0)
http://windowanswers.com/windows-rt/windows-10-falls-to-access-network-drives-297748.html (http://windowanswers.com/windows-rt/windows-10-falls-to-access-network-drives-297748.html)