D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-605L => Topic started by: bonztbad on January 12, 2017, 10:26:29 PM
-
hi
i use 100mbps connection,if i direct lan from modem to pc i get 90-100mbps.
but if i use this router it 's give me full speed just a few minutes and then speed dropped to 25mbps max. with many error ack flood bla..bla..bla. so i need to turn off modem and router for a few minutes to normalize my speed back to 100mbps.
-dir-605l
-v.2.08/any ,except 2.05UI
-b2
-asia region
-modem dassan h670g
i tried my friend's router other brand, its working like charm give me full speed anytime.
please dont ask me to turn on/off any setting or change some setting. trust me i already change the settings 1 by 1, but the problem is still persist.
i already search and install all firmware and then factory reset. only v.2.05ui work better. this version doesnt dropped my connection to 25mbps but 70mbps. but when i upgraded to other version with/without reset setting it will increase my speed to 100mbps for a few minutes then drop 25mbps. with error log ack flood icmp bla bla bla.. i think this error log is caused by my isp, they block any public dns. if i use dnscrypt or any proxy/vpn this will cause my internet immediately dropped to 25mbps even i already turn off vpn/dnscrypt. but not for 2.05ui, still stable at 70mbps ;D please give me good solution,or please make firmware rev based ver 2.05ui for increase speed. thank you!
nb: i connect just for 1 pc with LAN connection. i already connect with different pc but give me same problem. and ver 2.05ui cannot change bandwidth,only show 20mhz and greyed out. other firm ver able to change 20/40mhz.
-
this is the errors from page 1, total 20 pages
Jan 13 14:34:37 Port Scan Attack Detect (ip=31.13.78.14) Packet Dropped
Jan 13 14:34:37 Per-source ICMP Flood Attack Detect (ip=117.102.117.208) Packet Dropped
Jan 13 14:34:37 Per-source ACK Flood Attack Detect (ip=31.13.78.14) Packet Dropped
Jan 13 14:34:37 Whole System ACK Flood Attack from WAN Rule:Default deny
Jan 13 14:34:37 Whole System ICMP Flood Attack from WAN Rule:Default deny
Jan 13 14:34:37 Whole System UDP Flood Attack from WAN Rule:Default deny
Jan 13 14:33:37 Port Scan Attack Detect (ip=31.13.78.17) Packet Dropped
Jan 13 14:33:37 Per-source ACK Flood Attack Detect (ip=31.13.78.17) Packet Dropped
Jan 13 14:33:37 Whole System ACK Flood Attack from WAN Rule:Default deny
Jan 13 14:32:37 Per-source ICMP Flood Attack Detect (ip=117.102.117.208) Packet Dropped
-
Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
Try this FW version?
http://forums.dlink.com/index.php?topic=62642.0 (http://forums.dlink.com/index.php?topic=62642.0)
-
Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
Try this FW version?
http://forums.dlink.com/index.php?topic=62642.0 (http://forums.dlink.com/index.php?topic=62642.0)
thanks for reply!!
i tried but nothing worked...
btw i already solved the problem by upgrading firmware with ver 2.05 (not 2.05UI). this firmware working good so far..
here the complete firmware for dlink
http://tsd.dlink.com.tw/downloads2008.asp (http://tsd.dlink.com.tw/downloads2008.asp)
select DIR and 605L then click go.
-
The linked version didn't work for you?