D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: musiclover2011 on January 14, 2017, 12:24:18 PM
-
Hello Dear DIR-655 friends.
I would like to make a Schedule like this:
One MAC address should only be allowed to get access to the router sunday - thursday 18.00-20.30 and friday - saturday 18.00-23.00. How do i make such a Schedule? What time do i write and how? I tried some models but no success. If somebody please could help me I would be very happy :)
Maria Benson
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- What Hardware version is your router? Look at sticker under the router case.
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the routers web page under status.
- What region are you located?
- Are you wired or wireless connected to the router?
Router Access Control, Blocking, Web Filters and Scheduling FAQ (http://forums.dlink.com/index.php?topic=56479.0)
To set up scheduling:
1. Reserve device IP addresses ON the router under Setup/Networking.
2. Set up a schedule under Tools/Schedule on the routers web page. Customize your dates and times here.
3. Use Advanced/Access Control configured and apply the customized schedule to a policy and to the PC(s) or device(s) desired to be controlled.
4. Ensure Time is set correctly on the router. Tools/Time.
I do believe Setup/Networking/DNS Relay and or Setup/Internet/Manual/Advanced DNS Services need to be enabled along with configuring Reserved IP addresses, Scheduling, and Access Controls.
Additional Info:
How to Block a specific port using Access Control: http://forums.dlink.com/index.php?topic=58731.0 (http://forums.dlink.com/index.php?topic=58731.0)
How to set up Web Filters: http://www.dlink.cc/d-link-wireless/how-to-setup-website-filter-on-d-link-dir-series-router-dir-655.htm (http://www.dlink.cc/d-link-wireless/how-to-setup-website-filter-on-d-link-dir-series-router-dir-655.html)
-
Thank you for your answer. But my question is just "how" and what do i write in the time boxes if i want this rule that i specified above. I want the MAC adress only to be "Open" on sunday - thursday between 18.00 and 20.30. Friday - saturday i want the mac adress to be "Open" between 18.00 and 23.00. Can someone help me to "make a Schedule" like this and tell me how to write it in?
Please... :)
-
I believe you can select 12 hour or 24 hour which maybe what your needed to select if you want to use 18:00 and 23:00