D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-655 => Topic started by: jason1722x on July 20, 2009, 07:31:48 PM

Title: Cannot connect to a website.
Post by: jason1722x on July 20, 2009, 07:31:48 PM
Even befor the 1.31 release I could not access "www.mwave.com". I always used them but since switched to newegg. That is the only site that I know of that I've had connection issues. Browser just times out.

I was trying to figure out what has changed with my config. or maybe my ISP (RoadRunner).

Any thoughts or suggestions?
Title: Re: Cannot connect to a website.
Post by: lizzi555 on July 20, 2009, 08:32:54 PM
Did you try whether you computer can resolve the address to 206.111.48.22 ?
Any other machine in your net can open the website ?

Try a telnet on port 80 to this IP.

telnet 206.111.48.22 80

Press 2 or three times enter, you should receive an answer:
Code: [Select]


HTTP/1.1 400 Bad Request
Server: Microsoft-IIS/5.0
Date: Tue, 21 Jul 2009 04:29:24 GMT
Content-Type: text/html
Content-Length: 87

<html><head><title>Error</title></head><body>The parameter is incorrect. </body>
</html>

C:\Users\Lizzi> verloren.

No problem here to open the web site through DIR-655 with 1.32 firmware.
Title: Re: Cannot connect to a website.
Post by: jason1722x on July 21, 2009, 05:13:45 AM
4 other desktops and one laptop could not access "Mwave.com".
I never dealt with telnet befor and from what I gather it's kinda like an ftp client. I did try (start-->run-->telnet 206.111.48.22 80) Nod32 popped up and I allowed it to try to connect, nothing!

I'm able to connect from a different location with the labtop, which is really bugging me.
I'm going to clear my logs and see if I have some ports blocking happening.


update:
 
[INFO] Tue Jul 21 08:14:38 2009 Blocked incoming TCP connection request from 221.192.199.41:12200 to 24.95.90.66:8085

how do I get past the blocking?
Title: Re: Cannot connect to a website.
Post by: ttmcmurry on July 21, 2009, 05:36:05 AM
Is SecureSpot enabled?
Title: Re: Cannot connect to a website.
Post by: lizzi555 on July 21, 2009, 05:42:48 AM
The blocked address is from China, I don't think you want it to connect.
Code: [Select]
% [whois.apnic.net node-2]
% Whois data copyright terms    http://www.apnic.net/db/dbcopyright.html

inetnum:      221.192.0.0 - 221.195.255.255
netname:      UNICOM-HE
descr:        China Unicom Hebei Province Network
descr:        China Unicom
country:      CN
admin-c:      CH1302-AP
tech-c:       KL984-AP
remarks:      service provider
mnt-by:       APNIC-HM
mnt-lower:    MAINT-CNCGROUP-HE
mnt-routes:   MAINT-CNCGROUP-RR
status:       ALLOCATED PORTABLE
Title: Re: Cannot connect to a website.
Post by: jason1722x on July 21, 2009, 05:53:40 AM
Quote from: ttmcmurry on July 21, 2009, 05:36:05 AM
Is SecureSpot enabled?
SecureSpot is disabled. I did enable it and tried to connect with out success. Disabled it again, nothing.
Title: Re: Cannot connect to a website.
Post by: jason1722x on July 21, 2009, 06:01:37 AM
Quote from: lizzi555 on July 21, 2009, 05:42:48 AM
The blocked address is from China, I don't think you want it to connect.
Code: [Select]
% [whois.apnic.net node-2]
% Whois data copyright terms    http://www.apnic.net/db/dbcopyright.html

inetnum:      221.192.0.0 - 221.195.255.255
netname:      UNICOM-HE
descr:        China Unicom Hebei Province Network
descr:        China Unicom
country:      CN
admin-c:      CH1302-AP
tech-c:       KL984-AP
remarks:      service provider
mnt-by:       APNIC-HM
mnt-lower:    MAINT-CNCGROUP-HE
mnt-routes:   MAINT-CNCGROUP-RR
status:       ALLOCATED PORTABLE

http://www.who.is/dns/mwave.com/

yeah that must have been from a torrent