D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-320 => Topic started by: cappy0815 on January 18, 2017, 11:06:58 PM

Title: DNS-320 nor reachable
Post by: cappy0815 on January 18, 2017, 11:06:58 PM

Hey guy,

my DNS-320 is not reachable after a powerloss.
Immediately after startup the webinterface ist reachable but it is not possible to log in.
After aprox. a minute it is not reachable anymore.
It is not possible to establish a ftp, web, etc connection.
But the device is connected to my DHCP and it is possible to ping it.
It is running in RAID1 mode.

What happens with my HDD data if I reset the NAS and how is it possible?
What happens with my HDD data if I get a new DNS-320 and switch the disk to a new system?

What are your recommendations?

Thank yo uvery much
Cappy

Title: Re: DNS-320 nor reachable
Post by: FurryNutz on January 19, 2017, 01:48:44 PM

• What Hardware version is your DNS? Look at the sticker behind or under the device.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the DNSs web page under status.
• What region are you located?

What Mfr and model is the main host router?
Is the DNS getting a Dynamic IP address from the main host router? I recommend using a Static IP address ON the DNS set to 192.168.#.30 or .20