D-Link Forums

D-Link Wireless Access Points For Business => DAP-2360 => Topic started by: go4java on January 28, 2017, 04:15:29 AM

Title: Home-Network connection prob with DAP-2360 Rev. B1
Post by: go4java on January 28, 2017, 04:15:29 AM

Hi,
I've already running 2 other DAP-2360 in my home network and now trying to connect another AP.
The 2360 has the latest firmware and I was able to connect/configure with my notebook.
Prior to the f/w, I've been resetting the box completely, with login: admin/blank.
Then I opened the basic settings to choose "get IP from DHCP" (from my Fritz 7490 router) and was able to SAVE this setting.
Then I directly confirmed again with "SAVE config" from the top level navigation.
After 60s, I entered the GUI again and this setting has not been saved (it was static IP again). Why?

Title: Re: Home-Network connection prob with DAP-2360 Rev. B1
Post by: FurryNutz on January 28, 2017, 12:33:58 PM

Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)

• What Hardware version is your DAP? Look at the sticker under the DAP.
• Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the DAPs web page under status.
• What region are you located?

What browser are you using? Try IE11 or FF.

Title: Re: Home-Network connection prob with DAP-2360 Rev. B1
Post by: go4java on January 28, 2017, 11:54:31 PM

thx, found the problem. Cable was defect. Replaced and everything  works fine now. With same SSID and wpa password for all 3 devices. Channels 1, 7 and 13. Have a good day

Title: Re: Home-Network connection prob with DAP-2360 Rev. B1
Post by: FurryNutz on January 29, 2017, 11:48:05 AM

Glad you found the problem.
Enjoy.