D-Link Forums

D-Link Enterprise => DGS-3620-Series => Topic started by: Sunks08 on March 31, 2017, 05:05:32 AM

Title: snmp DGS3324SR
Post by: Sunks08 on March 31, 2017, 05:05:32 AM

Hello,

Im trying to monitor my level 3 DGS-3324SR Stackable Ethernet Switch with snmp.

I can monitor all my other switch 3526 in the same vlan via snmp, but not this one.
Everything is configured but when i do :
"snmpwalk -v2c -c public xx.xx.xx.xx
"Timeout: No response from xx.xx.xx.xx"

My config is like that:
------------------------------------------
delete snmp community public
delete snmp community private
delete snmp user initial
delete snmp group initial
delete snmp view restricted all
delete snmp view CommunityView all

config snmp engineID 800000ab0300055d1e38a0
create snmp view restricted 1.3.6.1.2.1.1 view_type included
create snmp view restricted 1.3.6.1.2.1.11 view_type included
create snmp view restricted 1.3.6.1.6.3.10.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.11.2.1 view_type included
create snmp view restricted 1.3.6.1.6.3.15.1.1 view_type included
create snmp view CommunityView 1 view_type included
create snmp view CommunityView 1.3.6.1.6.3 view_type excluded
create snmp view CommunityView 1.3.6.1.6.3.1 view_type included

create snmp group public v1 read_view CommunityView notify_view CommunityView
create snmp group public v2c read_view CommunityView notify_view CommunityView
create snmp group initial v3  noauth_nopriv read_view restricted notify_view restricted
create snmp group private v1 read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group private v2c read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group ReadGroup v1 read_view CommunityView notify_view CommunityView
create snmp group ReadGroup v2c read_view CommunityView notify_view CommunityView
create snmp group WriteGroup v1 read_view CommunityView write_view CommunityView notify_view CommunityView
create snmp group WriteGroup v2c read_view CommunityView write_view CommunityView notify_view CommunityView

create snmp community private view CommunityView read_write
create snmp community public view CommunityView read_only

create snmp user initial initial


# MANAGEMENT
enable snmp traps
enable snmp authenticate_traps
config snmp system_name xxx
config snmp system_location xxx
config snmp system_contact xxx

disable rmon
-----------------------------------

It's the same config for the 3526dlink switch and i can monitor them with snmp so i don't understand why i can't get OID information of this DGS3324.


Thanks !

Title: Re: snmp DGS3324SR
Post by: FurryNutz on April 03, 2017, 06:33:05 AM

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.