D-Link Forums
The Graveyard - Products No Longer Supported => Routers / COVR => WBR-2310 => Topic started by: nysh on July 26, 2009, 08:04:13 AM
-
I am trying to connect my laptop at home to my office network through VPN. however it always failed. with the same setting in my laptop, I can successfully connect to my office in a Holiday Hotel, so the setting in my laptop must be correct.
the WBR2310 router in my home is controlled with another desktop and I have updated the fireware to 1.05.
Anybody has any suggestions?
Thanks.
-
I don't use the 2310 firmware anymore, so can't remember the setting, but you will need to enable a few setting for a VPN to work. I use the Cisco VPN at work (vsn 1.5 or something)...
Now lets see (from memory)...
Make sure ALL the boxes are checked in the Advanced / Firewall / VPN Passthough screen.
I don't know if enabling the Gaming option would help, but it is supposed to help some things. Also, I don't know if you need to enable multicast streams... you could do worse than experiment and see if these two things help too! These two are under Advanced / Advanced Network ....
Good luck.
-
sorry, it still does not work.
thanks anyway.
-
I am having the same problem. I know my VPN works but for some reason at home through my WBR-2310 it always says "Connection terminated by the client" I am using Cisco Systems VPN Client v4.8.01.0300 and firmware 1.05 on my router. I have quadrupled checked and all 3 VPN passthrough options are and were enabled, by default, and I tried enabling and disabling other services but no luck.
Did a full reset then firmware upgrade to 1.05.
I have used many VPN clients before with no problems on the WBR-2310 including Nortel Connectivity Client and AT&T's VPN for IBM
Dlink, help?