D-Link Forums

The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: battulga on August 10, 2009, 08:43:18 PM

Title: how to configure internet connection on the WAN1.
Post by: battulga on August 10, 2009, 08:43:18 PM

How to configure DFL 800 setting ?
I can't connect to internet. how to configure internet connection on the WAN1.

Please help me ? :(

Title: Re: how to configure internet connection on the WAN1.
Post by: NovaE on August 10, 2009, 09:21:57 PM

What type of connection are you trying to configure on WAN1. ?

Title: Re: how to configure internet connection on the WAN1.
Post by: battulga on August 10, 2009, 11:49:33 PM

Static IP. from ISP give me some IP.  how to configure  from wan1 to lan network write rule ?

Title: Re: how to configure internet connection on the WAN1.
Post by: NovaE on August 11, 2009, 12:25:23 AM

Configure your objects firstly with the details from the ISP.

Wan1_IP = static IP supplied.
Wan1_GW = Supplied. (usually this will be in most cases 1 below your static.). eg, IP=192.168.1.2--gw - 192.168.1.1
Wan1_DNS = Supplied by ISP.

Rules for outgoing traffic would be.

1  drop_smb-all  Drop  lan  lannet  wan1  all-nets  smb-all
2  allow_ping-outbound  NAT  lan  lannet  wan1  all-nets  ping-outbound
3  allow_ftp-passthrough  NAT  lan  lannet  wan1  all-nets  ftp-passthrough
4  allow_standard  NAT  lan  lannet  wan1  all-nets  all_tcpudp

Hope this helps a little. This is the basic table defaulting on the DFL.

Title: Re: how to configure internet connection on the WAN1.
Post by: battulga on August 11, 2009, 01:34:42 AM

Tnx for reply to me . But i tring to it. it is not connect to my server(win server2003). There working DHCP server and DNS server and Active Director . Why not connetced is it ?.

Title: Re: how to configure internet connection on the WAN1.
Post by: NovaE on August 11, 2009, 05:20:39 PM

In your server setup. Have you got the Router's IP setup in the DHCP ?

Also, When you say not connecting to your server. Do you mean from the outside you cant. Or You cannot connect to the internet from the server ?

Title: Re: how to configure internet connection on the WAN1.
Post by: Ricky_swe on August 14, 2009, 06:47:16 AM

Ive got the same problem have static IP from ISP got the same basic rules the only thing i can do outside the network is ping ISP's GW then its all dead.

Title: Re: how to configure internet connection on the WAN1.
Post by: Fatman on August 14, 2009, 03:18:11 PM

Check your WAN GW.

Title: Re: how to configure internet connection on the WAN1.
Post by: Ricky_swe on August 17, 2009, 12:50:43 AM

Hi fatman if you replyed to me ive checked GW_IP and its ok and i also can ping so far but not any further.

Title: Re: how to configure internet connection on the WAN1.
Post by: Fatman on August 17, 2009, 08:24:12 AM

In another thread you indicate you found your issues with getting outbound traffic working, is that so for this thread too Ricky_swe?

Title: Re: how to configure internet connection on the WAN1.
Post by: Ricky_swe on August 17, 2009, 11:37:50 PM

Hi Fatman yes when i did a factoryreset and a new config in another net i got it working flawless.