D-Link Forums
D-Link Enterprise => DGS-1210-Series => Topic started by: jcquirin on September 15, 2017, 02:47:20 AM
-
Hi,
I'd like to know if it's possible to setup a port for 2 different VLAN access, for now i have setup some ports to access different VLAN, but i don't know if it"s possible to setup one port for 2 VLAN for exemple. If yes, how to do it.
Thanks a lot
JChris
-
Link>Welcome! (http://forums.dlink.com/index.php?topic=48135.0)
- Link>What Firmware (http://forums.dlink.com/index.php?topic=47512.0) version is currently loaded? Found on the switches web page under status.
Check the user manual for any information regarding set up of VLANs for this model switch?
Some reading as well:
http://forums.dlink.com/index.php?topic=72435.0 (http://forums.dlink.com/index.php?topic=72435.0)
-
Hi,
The firmware is up to date, in fact, i guess that it's not possible to run 2 Vlans on one port with de DGS 1210 models, to do this, the right model is the 1510 models.. don't you think too ?
------------------------------------------
Boot Version : 1.00.003
Firmware Version :2.03.001
Protocol Version :2.001.004
Hardware Version : A1
-
Possible.