D-Link Forums
D-Link DSL Modem/Routers => Other DSL modem/routers => Topic started by: moshiachnow on May 01, 2018, 11:53:05 AM
-
B"H
I know this is about a different router but please cut me some slack - someone here probably knows how to solve this issue and I don't find this model listed. I set up the router, and changed the DNS settings to the settings required to get openDNS to work. I also changed the DNS settings in the PCs adapter to the same settings.
When I run openDNS using my old router (a Netgear) openDNS gives me detailed reports about traffic on my network. When I run it using the D-Link, I get, at the most, only two domains listed.
Does anyone know what I need to do that I am not doing to get openDNS to work?
Thanks.
-
What region are you located?
This model modem probably does not support any other 3rd party DDNS sites from what is preset already with in the UI.
-
From OpenDNS:
There are usually 2 reasons why OpenDNS is not logging traffic - 1) your devices is not pointing to OpenDNS, and 2) your IP address is not current. Can you check your router/device settings to see if you are pointed to us? Also, you can check on your Dashboard to see if your IP address is up-to-date as most home users have dynamic IP addresses. If both of these are correct, then please send us a ticket with your diagnostic test results. Instructions on how to run the test can be found here: https://support.opendns.com/entries/21841580-Diagnostic-Tool-Link-and-Instructions (https://support.opendns.com/entries/21841580-Diagnostic-Tool-Link-and-Instructions)
Also what Furry said. Was your netgear a modem/router also? Are you using the G225 as a modem or is it bridged behind another modem?
-
Thanks for the quick reply. The modem/router is pointed to OpenDNS (if by that you mean that it is pointing to the OpenDNS nameservers). I also changed the DNS settings in the network adapter to the same values, thinking that it might help. The IP address is current - according to the OpenDNS Updater ver 2.2.1 and the dashboard. I DO have a dynamic IP address. And the Netgear was also a modem/router (VVG2000) and the G225 is the only device between the phone line and the network.
I notice, however, that the IP address of the network in the Domains report at the top of the page where it says Domains for [name of network: IP address] is not the one that shows up on the OpenDNS updater and at the top of the dashboard. I just went in and added the current IP address, but shouldn't this update automatically?
I ran the diagnostics and the results are at https://diagnostic.opendns.com/d/5658803896844288
Thanks.
[added a day later]: After updating the IP address, it SEEMS to be working just fine.
-
Glad it's working now. Enjoy. ;)