D-Link Forums

The Graveyard - Products No Longer Supported => Other D-Link Products => Topic started by: Plus on July 19, 2018, 09:15:21 AM

Title: D - LINK DIR - 822+
Post by: Plus on July 19, 2018, 09:15:21 AM
When doing a firmware update the router stopped working.
I have one mini usb programmer ch341A but I need one FULL DUMP file to download.
I already sent a firmware that I downloaded from the official page to the roter chip but it does not boot.
Can someone help me to change the .bin file so it can load?

(https://preview.ibb.co/c5jjRy/502299_d_link_dir_822_main_image.png) (https://ibb.co/bJRymy)
(https://preview.ibb.co/eFTm6y/WP_20180717_07_57_23_Pro.jpg) (https://ibb.co/da9FzJ)
Title: Re: D - LINK DIR - 822+
Post by: FurryNutz on July 19, 2018, 11:30:28 AM
Link>Welcome! (http://forums.dlink.com/index.php?topic=49573.0)


Can you get to the recovery page here?
Emergency Recovery Mode (http://forums.dlink.com/index.php?topic=44909.msg163599#msg163599)

If not, you'll need to phone contact your regional D-Link support office.
Title: Re: D - LINK DIR - 822+
Post by: Plus on July 23, 2018, 07:13:31 AM
From Portugal

I tried this procedure but it did not work.
The router starts and then does not respond to anything, it only has two lights on (power and 2.4 G)

I already got the firmware that is on the router with the USB mini programmer, Now I need to send one to the router to boot up
Title: Re: D - LINK DIR - 822+
Post by: FurryNutz on July 23, 2018, 11:11:50 AM
You'll need to phone contact your regional D-Link support office.