D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-895L => Topic started by: i3zdx on January 10, 2019, 06:37:29 AM

Title: my router not working (DIR 895L)
Post by: i3zdx on January 10, 2019, 06:37:29 AM

hello

ihave 895l and i using it for 2yrs

yesterday i had to update the frimeware

after the update the router

the power  keep blinking with (orange light) till now
the network and other  is off

then i cant reach to the login website

Title: Re: my router not working (DIR 895L)
Post by: FurryNutz on January 10, 2019, 07:07:29 AM

Link>Welcome! (http://forums.dlink.com/index.php?topic=49573.0)

• What region are you located?

Review this and give it a try:
Emergency Recovery Mode (http://forums.dlink.com/index.php?topic=44909.msg163599#msg163599)

Let us know if this works. I would probably revert to the firmware version that was last working on it.

Title: Re: my router not working (DIR 895L)
Post by: i3zdx on January 10, 2019, 07:27:24 AM

Saudi Arabia (middle east)

i dont under stand this one

Store a copy of the router firmware (.BIN) on the HDD of a local PC. Download the FW file ahead of time.

note:i cant access to (192.168.0.1)

Title: Re: my router not working (DIR 895L)
Post by: FurryNutz on January 10, 2019, 08:18:39 AM

After following the recover mode setup, you can't access the recovery page at 192.;168.0.1?
Be sure you follow the recovery step process with a wired PC and the PC has a static IP address set ON the network adapter on the PC.

Title: Re: my router not working (DIR 895L)
Post by: i3zdx on January 10, 2019, 08:24:20 AM

i didnt under stand this


1.Store a copy of the router firmware (.BIN) on the HDD of a local PC. Download the FW file ahead of time.

Title: Re: my router not working (DIR 895L)
Post by: FurryNutz on January 10, 2019, 08:27:15 AM

Ok, Download a copy of the FW version from your regional D-Link support site. Save this to your PC. Unpack the.zip file to see the .bin file.

Title: Re: my router not working (DIR 895L)
Post by: i3zdx on January 10, 2019, 09:22:45 AM

Power down the router and unplug the power cord

Press and hold the reset button on the rear of the router for 3 to 5 seconds and re-plug the power cord without releasing the reset button

Continue to hold the reset button until the amber power light keeps blinking on and off. NOTE: For some DIR series, continue holding the reset button up to 10 seconds.

doesnt work my router is keep blinking

http://192.168.0.1/
with IE

Title: Re: my router not working (DIR 895L)
Post by: i3zdx on January 10, 2019, 09:25:23 AM

i cant reach http://192.168.0.1/

with chrome and IE

Title: Re: my router not working (DIR 895L)
Post by: i3zdx on January 10, 2019, 09:49:08 AM

**********************************************************
ITS WOOOOOOOOOOOORRRKKKEEEEEEEEEEEEEEED
***********************************************************

Title: Re: my router not working (DIR 895L) (RESOLVED)
Post by: FurryNutz on January 10, 2019, 10:37:16 AM

Good to hear. Enjoy.  ;)