D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: kswison on January 28, 2019, 10:27:34 AM
-
Troubles and hoping someone can help me. I have had my DNS-323 running successfully for years and recently it will no longer mount.
I can access the Drive through my Browser into the DNS-323 Admin at 192.168.XX.XX. I can log in as Admin and make changes to the DNS-323 Drive. I am running a Raid_1.
Disk scans were successful with no issues. Today I upgraded the Firmware from 1.09 to 1.10 as I saw Bonjour is now built in, hoping that might fix my issue, but it made no difference.
Still not able to mount the W-NetDrive on my Mac.
I have gone into Finder, and 'Connet to Network' and entered "smb://W-NetDrive/Volume_1" and the connection fails, Stating "There was a problem connecting to the server "W-NetDrive. The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
I have gone into the Disk Utility app and the W-NetDrive does not show up.
I have a script that I have run for years to connect the W-NetDrive, but it no longer works either. I have a talking and a non-talking version. Talking version is as follows:
set testnet to 1
say "Hi Kev, I am attempting to PING the W Net Drive on the network"
repeat with idx from 1 to 5
try
set ping_result to (do shell script "ping -c 1 -t 1 192.168.XX.XX")
set testnet to 10
on error
say "Searching"
beep 3
set testnet to (testnet + 1)
delay 10
end try
if testnet = 10 then
exit repeat
end if
end repeat
if testnet = 10 then
delay 1
say "The W Net Drive was identified on the Network"
say "I am now attempting to mount the W Drive volumes"
mount volume "smb://W-NetDrive/Volume_1"
delay 7
say "The W Drive volumes should now be mounted"
end if
if testnet = 6 then
say "The W Net Drive could not be PINGED on the network"
say " I am unable to mount the W Drive Volumes"
end if
So the script finds the W-NetDrive (responding to the PING on the first try) and tells me it is now trying to mount the W-NetDrive, but mounting fails with the same message as noted above. This script has worked for years.
I am stuck as to why it will not mount on my Mac. Has something failed in my DNS-323 ?
Any help is greatly appreciated.
Thanks Kevin
-
Further to this with continued research, it's looking like it is an issue with Mac High Sierra and mounting SMB fileshare.
If/when I figure this out I will post solution
-
Well.... I seem to have this figured out... it's a High Sierra thing.
Ran this command in terminal, (see linked pages below)
sudo defaults write /Library/Preferences/com.apple.NetworkAuthorization AllowUnknownServers -bool YES
rebooted,
ran this command
mount -t smb://W-NetDrive/Volume_1
mac OS came up and asked me for username and password to logon, saved password.
and now it seems to be working.
Info came from here
https://www.jamf.com/jamf-nation/discussions/25564/macos-high-sierra-10-13-0-smb-mount-drive-issue (https://www.jamf.com/jamf-nation/discussions/25564/macos-high-sierra-10-13-0-smb-mount-drive-issue)
and here
https://support.apple.com/en-us/HT207112 (https://support.apple.com/en-us/HT207112)
I think this is resolved.
-
Thanks for the information. Glad you figured it out.