D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-859 => Topic started by: thecreator on April 06, 2020, 07:03:20 AM

Title: D-Link DIR-859 Hardware A3 with Firmware 1.07
Post by: thecreator on April 06, 2020, 07:03:20 AM

Hi Support,

Referencing this post:  http://forums.dlink.com/index.php?topic=75069.0 (http://forums.dlink.com/index.php?topic=75069.0)
It has received no replies.

I also own a DWA-182 D-link Adapter connecting to my D-Link DIR-859 Hardware A3 with Firmware 1.07 connecting to the 5GHz portion and the speed is below the 2.4GHz speed.

How can I correct / fix the speed issue?

I am not talking about the Internet Speed.

I am talking about the Wi-Fi Speed, copying files from the computer to my Mapped Hard Drive on my DNS-323 Unit.

Thanks in advance!

The Speed was just fine, when I first installed it.

Title: Re: D-Link DIR-859 Hardware A3 with Firmware 1.07
Post by: FurryNutz on April 06, 2020, 08:18:03 AM

Is the adapter driver up to date?
What is the connection rate seen with the adapter to the 5Ghz radio?
Is smart connect enabled on the router?
How is the DNS connected, direct wire to the router or thru a switch?
Has a reboot of the router, DNS and PC with adapter connected been performed?

Try same copying of files from a share setup on a 2ndary wired PC to compare speeds.

Something to review:
http://forums.dlink.com/index.php?topic=66011.0 (http://forums.dlink.com/index.php?topic=66011.0)