D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: simonkp on September 24, 2009, 07:11:57 AM

Title: Help Please- DLINK RAID volume missing
Post by: simonkp on September 24, 2009, 07:11:57 AM
Hi
I have a Firmware DNS-323 with firmware 1.06. I have  the below 2 drives.
Slot   Vendor   Model   Serial Number   Size
1   Seagate   ST3500320AS   9QM13RP6    500 G   
2   Seagate   ST3500320AS   9QM13T0W    500 G

The configuration was Raid 1 on volume 1 and  JBOD on Volume 2.    

Today I found that my DNS Lights were not working. when I pressed the button it switched on but I am not able to see the Volume 1 (Raid1).

HARD DRIVE INFO :
Total Drive(s):    2

Volume Name:    Volume_2
Volume Type:    JBOD
Total Hard Drive Capacity:    178084 MB
Used Space:    67619 MB
Unused Space:    110464 MB
-----------------------------------------
When I try to manually map the volume 1 it shows one folder on the drive and no files. All my data is gone!
And the mapped drive in windows shows 45.7 G free of 72 G.

Can any one help me here to understand what happened here and to restore my data?

Appreciate your help

Thanks,
Simon
Title: Re: Help Please- DLINK RAID volume missing
Post by: hilaireg on September 26, 2009, 10:01:55 AM
Try mounting each HDD using EXT2FSD (http://www.ext2fsd.com); this may allow you to obtain a copy of your data ... alternatively, you will need to rebuild your RAID and restore your files from your external backup source.

Few other items:


HTH,