D-Link Forums

The Graveyard - Products No Longer Supported => Network and WIreless Adapters => DWA-130 => Topic started by: overlock on September 27, 2009, 10:08:35 AM

Title: DWL-G122: "AIrGCFG.exe - Entry point not found" error on start up
Post by: overlock on September 27, 2009, 10:08:35 AM: I am getting above message on every start up of my Windows XP desktop. Did some search on Google and it looks like it is related to the D-Link wireless adapter DWL- G122 which I have. I check on the D-link site for an update on the driver and didn't find any. Anyone had the same issue and can help me?

Overlock
Title: Re: DWL-G122: "AIrGCFG.exe - Entry point not found" error on start up
Post by: mariokrt64 on December 14, 2010, 05:17:14 PM: I have a similar problem...I just installed this USB adapter that I had stored for a few years...and it connects and access the web...but cannot access the configuration utility...gets a similar message at Xp startup....."The procedure entry point apssearch interface could not be located in the dynamic link library wlanap.dll"...and also another message.."appsGet Ready cannot be located in wlanap.dll".

Disabled the antivirus and firewall per directions at D-link support with no results...Also unistalled and re-installed the driver per D-Link directions and did not work.....

Any help is appreciatted...

I have Win Xp SP3 and D-Link DWL-G122 USB adapter H/W Version A2...Firmware Version 1.02.

It's puzzling, since otherwise the adapter is working ok....access the web...
Title: Re: DWL-G122: "AIrGCFG.exe - Entry point not found" error on start up
Post by: somp on December 19, 2010, 08:18:21 AM: Hi

Try this solution, (http://tinyurl.com/aquaft), download wlanapi.dll from the blogg and place them as instructed. I have rev b and have no problem with this driver, dwlg122_revb_driver_204, can't recall where I got it from, I am sure you can locate this with Google. Good Luck.
Title: Re: DWL-G122: "AIrGCFG.exe - Entry point not found" error on start up
Post by: mariokrt64 on December 21, 2010, 01:08:19 PM: My internet connection was running fine, except I could not access the D-Link utility...I just got the messages described before....I tried you solution and now I get the "D" symbol in the lower right corner of the tool bar that I was not getting before, but sitll cannot run the utility....this time I did not got the error messages either...but still cannot run the D-link utility....

Is there something else I could do?

Thanks anyway for your input.....
Title: Re: DWL-G122: "AIrGCFG.exe - Entry point not found" error on start up
Post by: somp on December 22, 2010, 06:05:06 AM: D-link recommends you use XP wireless 0 configuration services instead of D-link utility. You can configure your wireless set up from Network connection.
Title: Re: DWL-G122: "AIrGCFG.exe - Entry point not found" error on start up
Post by: mariokrt64 on December 22, 2010, 06:44:48 AM: Interesting why they would provide their utiliity then....I thought it would provide additional functionality...ok...then I will leave it there...

thanks for your reply...
Title: Re: DWL-G122: "AIrGCFG.exe - Entry point not found" error on start up
Post by: chuckyr on November 06, 2011, 02:15:12 PM: So let me be clear. I have a DWL-G122 H/W Ver. A.2 Firmware Ver. 1.02. The driver on the Australian site is compatible with Windows XP SP3?
Title: Re: DWL-G122: "AIrGCFG.exe - Entry point not found" error on start up
Post by: rrrmmm on January 07, 2012, 08:34:14 AM: I had this same issue... but I solved my problem.. via this ( entry point not found dynamic link library (http://www.articlewritingclicks.com/Dll_Errors/Entry_point_not_found_dynamic_link_library_Error__How_to_Fix_it.html) ) post..