D-Link Forums

The Graveyard - Products No Longer Supported => Hubs and Switches => DES-1228P => Topic started by: mohec1941 on October 09, 2009, 08:57:04 AM

Title: DES-1228P & DWL-3200 VLAN problems
Post by: mohec1941 on October 09, 2009, 08:57:04 AM

First let me list my VLAN configuration:

VID   VLAN Name   Untagged VLAN Ports   Tagged VLAN Ports
1   Church                  1-19, 25-28                          20-23
2   Guest                          24                          20-23
3   Shared                       20-23   


Switch Firmware: 1.31.01
DWL-3200 Firmware: 2.50

I have 4 DWL-3200's on VLAN 3 with Multiple SSID's. The Primary SSID has WPA Auto Enterprise set with TKIP and using a RADIUS server configured for VLAN 1. The second SSID is an open system with VLAN 2. The problem is that when I put a DWL-3200 on the Shared VLAN, the second SSID routes properly, but I cannot access the primary SSID network. When I plug it into a port on the Church VLAN, it sees the RADIUS server fine, but the second SSID does not route properly. Any help would be appreciated.

Title: Re: DES-1228P & DWL-3200 VLAN problems
Post by: Fatman on October 09, 2009, 11:15:47 AM

The right way of doing this would be to remove the "Shared" VLAN,  The AP should be on a port that is untagged on your management VLAN (the Church VLAN) and is tagged on the guest VLAN.

Set up MSSID and VLANs on the DWL-3200AP to make the church SSID your primary and add an additional for guests on the appropriate VLAN tag.  Remember it is the VID (number from 2-4096) not the name that identified your VLANs between devices.